"*************************************************************************"
"  RIZWAN LABELS                                          Version 4.00    "
"  by Yusuf Software             (414) 551-7431             EVALUATION    "
"*************************************************************************"
"  "
"                              YUSUF SOFTWARE"
"                             1550 19th Avenue"
"                    Kenosha, Wisconsin 53140-1523, USA."
" "                               
" "
" If you have any questions or suggestions send e-mail to yusuf@cs.uwp.edu"
"    or write to us at the above address.  This service is available"
"                to both registered and non-registered users."
"  Please remember to identify your copy of Rizwan Labels by its version"
"      number.  Without the version number we may not be of much help."
"*************************************************************************"
" "
" "
"TO PRINT THIS ENTIRE FILE ON YOUR PRINTER"
"----------------------------------------- "
" "
"1)  Exit to your DOS prompt (Hit ESC)"
"2)  Type:  PRINT README.TXT  hit [Enter]"
"3)  Then hit [Enter] again."  
" "
"NOTE:  To print what is displayed on the screen press PRINT SCREEN key"
"       at any time.  Make sure you printer is on line."
" "
" "
"-------------------------------------------------------------------------"
" "
" "
" "
"INSTALLATION"
"------------"
" "
"To setup Rizwan Labels:"
" "
"   Rizwan Labels was compressed using the zip archiver utility under the"
"   UNIX operating system.  Download the   rl40.zip   file and uncompress"
"   it as stated below." 
" "
"1)   While in UNIX create a new sub-directory and copy rl40.zip to it."
"2)   Then uncompress it by typing:  unzip rl40.zip"
"3)   Then download all uncompressed files to your PC."
"4)   Copy all files to C:\RL4 using DOS COPY command.  The program"
"     WILL NOT run if you put it under any other directory than C:\RL4."
" "
"        You will need to add Rizwan Labels program directory path to your" 
"        DOS search path so DOS will be able to find Rizwan Labels program" 
"        files.  The path should be added to your  PATH statement in your" 
"        AUTOEXEC.BAT file."
" "
"NOTE:"
" "
"  If you are new to DOS and do not know how to edit your AUTOEXEC.BAT file" 
"  you may start using Rizwan Labels as follows:"
" "
"  To start up Rizwan Labels type:"
"  ------------------------------"
" "
"  C:  [hit Enter]"
"  CD \RL4  [hit Enter]"
"  RUN  [hit Enter]"
" "
"  NOTE:  RUN command will only work if you have DOS version 3.2 or higher."
"         If you have a previous DOS version you MUST add Rizwan Labels"  
"         directory to your PATH statement in AUTOEXEC.BAT file as "
"         described below."
" "
" "
" "
"ADDING RIZWAN LABELS PATH TO DOS PATH VARIABLE"
"---------------------------------------------- "
" "
"If you are an experieced DOS user you should add the following path and" 
"then start up Rizwan Labels from C:\RL4 by typing RL instead of using the" 
"RUN.BAT batch file."
" "
"    If you are using MS-DOS or IBM-DOS version 5.0 or later you may add" 
"    the required path in the following manner.  To find out which version" 
"    you have type VER and hit [enter] DOS will report its version.  If you" 
"    are using a DOS version older than 5.0 you should use EDLIN  to make" 
"    the neccessary changes in the AUTOEXEC.BAT file or any other ASCII text" 
"    file editor (see instructions below for DOS 4.0)."
" "
"         For DOS Version 5.0 or later:"
"         At your DOS C:\> prompt type the following:"
" "
" "
"         CD \                                        then hit [Enter]"
"         ATTRIB -R AUTOEXEC.BAT                      hit [Enter]"
"         EDIT AUTOEXEC.BAT                           hit [Enter]"
" "
"         The DOS 5.0 editor will load the AUTOEXEC.BAT file and list its"
"         contents.  Look for the line beginning with `PATH'.  Then place" 
"         your cursor on the first letter of the word after PATH or right" 
"         after the = sign if there is one. Then do as follows:"
" "
"                 C:\RL4;                {type exactly as is}"
"                 [ALT] [F]              {Hold Alt-key down and press F}"
"                 [S]                    {press S to save the file}"
"                 [ALT] [F]              {to pull-down file menu again}"
"                 [X]                    {to exit the DOS Editor}"
"                 [CTRL] [ALT] [DEL]     {to restart the computer so changes"
"                                          will take effect}"
" "
"         For DOS Version 4.0 or previous:"
"         At your DOS C:\> prompt type the following:"
" "
" "
"                 CD \                          then hit [Enter]"
"                 ATTRIB -R AUTOEXEC.BAT        hit [Enter]"
"                 EDLIN AUTOEXEC.BAT            hit [Enter]"
" "
"                 At the * type as follows:"
" "
"                 Spath                         then hit [F6]"
" "
"                 It should search the PATH statment in your AUTOEXEC.BAT" 
"                 file and display it on screen.  If it says `Not Found' make" 
"                 sure you typed the command correctly.  If it still says "
"                 `Not Found' then there is no PATH statement in the file and" 
"                 you may proceed with the next step below."
" "
"                 When the PATH statement is displayed type an   i   and hit" 
"                 [Enter].  This will put you in the EDLIN insert mode."
" "
"                 Now type:  path c:\rl4;         DO NOT hit [Enter]"
" "
"                 Right after the semi-colon (do not leave any space) copy" 
"                 the line above it exactly as it appears EXCEPT for the word" 
"                 `path'.  Make sure you typed everything correctly.  To make" 
"                 changes backspace and re-type.  Once it is typed correctly" 
"                 hit [enter] and then type an   e  and hit [Enter].   This" 
"                 will save the file and return to DOS prompt."
" "
"                 You should now reboot your computer.  To reboot press" 
"                 CTRL, ALT, and DEL keys at the same time.   If all went" 
"                 well, you computer will reboot and Rizwan Labels will be" 
"                 ready to for use.   See start up procedure below to run" 
"                 Rizwan Labels.  Remember you MUST reboot your computer for" 
"                 changes to take effect."
" "
"                 After it has rebooted you may type  PATH  and hit [Enter]" 
"                 at DOS prompt to check and see if the Rizwan Labels path"  
"                 (C:\rl4) is included in the PATH statement.  If it is there" 
"                 then it all worked well.  If not, try again.  You may want" 
"                 to consult your  DOS User's Guide if you need help using" 
"                 EDLIN."
""
"STARTUP   (If you have added Rizwan Labels directory to PATH statement"
"-------    in your AUTOEXEC.BAT file and then rebooted.)"
" "
"                 To start Rizwan Labels type:"
" "
"                          CD \"
"                          CD RL4"
"                          RL"
" "
" "
" "
"---------------------------------------------------------------------------"
""
""
" "
"SYSTEM REQUIREMENTS:"
"-------------------- "
" "
"DOS Version:  3.2 or higher  (may also work on previous versions)"
"CPU RAM:      512kb or higher"
"HARD DISK:    Required!  Must have about 2.5 MB free space."
"MACHINES:     IBM/PC  (with CGA card or better)"
"              IBM XT  (with CGA card or better)"
"              IBM AT  (with CGA card or better)"
"              IBM PS/2 (with CGA or better)"
"              100% IBM Compatible (with CGA card or better)"
"PRINTERS:     HP LaserJet or HP LaserJet compatible "
"              HP LaserJet IIP or HP LJ-IIP compatible"
"              HP LaserJet IIIP  or HP LJ-IIIP compatible"
"              Epson Action Laser IIP "
"              IBM Proprinter X24/XL24"
"              IBM Proprinter II/XL "
"              IBM Proprinter"
"              Epson FX & LQ series printer or compatible."
"              Or any standard dot matrix printer"
"STORAGE:      Hard disk and floppy high or low density."
" "
"-------------------------------------------------------------------------"
" "
" "
" "
" "
"ABOUT RIZWAN LABELS 4.0"
"-----------------------"
" "
"Rizwan Labels version 4.0 has undergone several revisions and offers"
"many more features and much more power than any previous version. In"
"many ways it is superior to its competion and yet easier.  It offers"
"unique powerful and flexible search options as well as data sorting" 
"according to any record field.  Version 4.0 offers easy to understand"
"pull-down menu commands which put all the power at your finger tips."  
"Moreover, it supports adjustable labels sizes and sheet formats that"  
"can be fine tuned to your printer and stationery of maximum four"
"columns across and unlimited number of rows.  A new subset of label"
"style called `General Labels' lets you enter free form text of 12" 
"lines with three different predefined text borders - ideal for eye"
"catching labels, disk labels, workshop labels, bookplates, identify"
"craft supplies, stockroom labels, shelf markers, name badges e.t.c."
" "
"The program automatically keeps tract of you entries and will remind you" 
"if your entry will exceed your current configuration.  Now, configuration "
"for each data file is saved along with it and each time you retrieve a" 
"file, the configuration for that file is automatically loaded.  This new" 
"feature let you have different configuration for different files," 
"allowing you to work with diversified kind and sizes of labels.  When" 
"you create a data file for the first time, an initial suggested"
"configuration is created for that file. If you wish you may update it to" 
"meet your needs.  That means you can use almost any type or size of labels"
"from single label across to four labels across."
" "
" "
"What can RIZWAN LABELS do?"
"--------------------------"
" "
"Rizwan Labels is a full featured personal mail list manager.  Each"
"data file can contain 100 records and up to 512 data files can"
"be created depending on your computer system and disk space.  Each"
"record has fields for address, home phone, work phone, fax, social"
"security number, comments, and group field for categorizing your records"
"within a single data file.  You may sort your data in ascending order"
"according to any record field except street name.  You may search and"
"process records according to any field using wild cards that allow you to" 
"replace entire fields or sub-string within a field for a powerful and"
"easy search.  You may print return address labels from single column "
"to 4 four columns across using a laser or dot matrix printer.  You" 
"may also print address directly on mailing envelopes and your return"
"address will automatically get printed on each envelope.  Furthermore,"
"you can print reference lists for all or subset of records within"
"the data file.  With general label format you can print disk labels or"
"any label of 12 printable lines or less with 3 different predefined borders."
"General label must be 2 inches high or more.   A General Label smaller"
"than 2 inches may only be used when General Label configuration is set"
"to 1 column with 1 label per column."
" "
" "
"NOTES"
"-----"
" "
"1)  Rizwan Labels is initially setup to print on a standard dot matrix"
"    printer.  In order to use fonts or laser printer you must select"
"    the appropriate printer or use the LASER.RL4 sample data file."
" "
"    To select a printer:"
" "
"    User arrow keys to pull-down SETUP menu. "
"    Select `Printer' hit enter."
"    Now place your cursor on `select Printer' hit enter"
"    Place your cursor on the name of your printer and hit enter"
"    Then hit the ESC key"
"    Now place your cusor on `Save new setup' and hit enter"
"    Then hit ESC key"
" "
"2)  The wildcard characters are the asterisk (*) and the question "
"    mark (?).  Question mark replaces only a single character in "
"    its place."
" "
"3)  You must first mark your entries before selecting `Begin printing'"
"    or else it will only print a blank page."
" "
"4)  Line formating keys will have no effect if the field you are"
"    trying to format has no text in it or is completely filled with"
"    text.  Line formating keys are, for example, the SHIFT+F6 to center" 
"    text in the field and etc...  They will normally be displayed on"
"    the screen if available in the current mode."
" "
"5)  If you have a laser printer you should use the LASER.RL4 sample"
"    data file because it is already setup to print on a standard"
"    HP Compatible laser printer.  However, you may have to make minor"
"    adjustments in the Address Label setup and the General Label Setup"
"    if it doesn't print right on your printer.  It can be done from"   
"    the SETUP menu.  To select the LASER.RL4 file select USE from the"
"    FILE menu."
" "
"6)  To select a font for printing pull-down PRINT menu and select the"
"    `select printer font' option."
" "
"7)  Good luck... Enjoy!"
" "
" "
"IMPORTANT"
"---------"
" "
"This is a shareware/trial version of the commercial Rizwan Labels 4.0 "
"personal mail list manager.  It is intended for evaluation purposes.  It"  
"includes some sample data files for your use.  Although, this version"
"of Rizwan Labels 4.0 is functional it will NOT save any new entries"
"to disk.  All other features will work."
" "
" "
"LICENSE AGREEMENT:"
"------------------ "
" "
"   Yusuf Software provides this program and licenses its use under the"
"   terms and conditions stated herein.  Users assume responsibility for" 
"   the selection of the program, use, and results obtained from"
"   the program."
" "
"   This is a SHAREWARE version of Rizwan Labels 4.0.  You may"
"   freely copy and give way this shareware evaluation version to"
"   anyone and/or upload it to your favorite BBS, so long as you copy"
"   all the files included in this package without modification in any"
"   shape or form.  Shareware vendors are granted permission to add"  
"   this evaluation version to their shareware or public domain libraries" 
"   and catalogs.  The shareware vendor should inform Yusuf Software if" 
"   they decide to add it to their collection so that Yusuf Software can"
"   inform them of future updates.  No person or shareware vendor"
"   can sell this version in any form for profit or otherwise except for" 
"   the cost of diskettes and their service.  Yusuf Software reserves all"
"   rights to the software."
" "
"   The program is provided `as is' without warranty of any kind. In"
"   no event will Yusuf Software be liable for any damages monetary"
"   or physical including any lost profits or savings or other loss"
"   arising out of the use of this software."
" "
" "
"PURCHASE ORDER"
"--------------"
" "
"If you liked Rizwan Labels 4.0 and wish to receive the fully functional"
"commercial version with a manual, please complete the Registration Form and" 
"mail it to the following address with a check for $15.00 (US dollars)."  
" "
"     Yusuf Software"
"     1550 19th Avenue"
"     Kenosha, WI 53140-1523"
"     Phone: (414) 551-7431"
" "
"Please make checks payable to Yusuf Software.  You may also order your"
"copy by e-mail.  Send your e-mail orders to yusuf@cs.uwp.edu (internet)."
"You may order COD (cash-on-delivery) but there will be additional shipping"
"and handling charges.  Please write to us for current COD rates."
" "
"To print the registration form:" 
"------------------------------- "
" "
"1)   Start up Rizwan Labels"
"2)   From the Edit menu select `Add Address Entry'"
"3)   Press F10"
"     Registration form will be displayed on screen."
"4)   Press Print Screen to print the form.  (make sure your printer is on)" 
" "
"Thank you for your support. "
" "
" "
"End of file."
"Press HOME to go to first screen"
"Press PAGE UP to backup."
"Press Up Arrow to backup one line at a time."

