NekoTech is pleased to announce it's emergence into the PC/Workstation
arena.  NekoTech introduced two products at the Spring Comdex 94 show in
Atlanta, GA. 

First, the Mach I, running at 166MHz, with 1Mb cache, produces 70
SPECint92, and 105 SPECfp92.  This system is designed to be an entry-level
graphics and multimedia workstation, pricing ranges from $3,995. to
$8,995.  We are also pleased to announce that BYTE magazine named the Mach
I a finalist in the BEST SYSTEM CATEGORY at Spring Comdex 94. 

Second, the Mach II, starts at 210MHz and is upgradeable to 320MHz.  At
210MHz, with 2Mb cache, it produces 130 SPECint92 and 184 SPECfp92.  This
system was designed around the power user and workstation applications,
pricing ranges from $6,995 to $12,995.

The Mach II was introduced at the Spring Comdex show running at 300MHz.  A
multimedia vendor, running demos at the show built a 3D, 60 frame, 640 x
480 model.  He stated "it takes a 486DX2-66 over 4 hours to render a 60
frame model".  However, on the Mach 2, running at 300MHz it took "12"
minutes.

The current platform is Windows-NT with OSF Unix (to be released soon).

                Mach I System Specifications

Processor                               Performance   166   200
Architecture   Alpha AXP 21066          SPECint92      70   84
Clock Rate     166MHz(up to 200MHz*)    SPECfp92      105  135
Onchip cache   16KByte
Secondary      1MByte (15ns)            System Memory
                                        16MByte
Board Specifications                    256MByte
Baby AT sized(half sized)
64-bit non-interleaved Cache            Mass Storage
64-bit non-interleaved Memory           1.44MByte, 3.5"
                                        Hard Disk 500MB, 1Gb, 2Gb

               Mach II System Specifications

Processor                               Performance   210  225
                                                      275  320
Architecture   Alpha AXP 21064          SPECint       130  135
                                                      170  192@
Clock Rate     210Mhz                   SPECfp92      184  205
                                                      240  272@
               (225MHz*, 275MHz*, 320MHz*)
Onchip cache   16KByte
Secondary      2MByte                   System Memory
                                        16MByte
Board Specifications                    512MByte
Full AT sized
128-bit interleaved ECC Cache           Mass Storage
128-bit interleaved Memory              Floppy Disk  1.44MB, 3.5"
                                        Hard Disk 500Mb, 1Gb, 2Gb

                    Standard Features

Embedded I/O Interfaces                 Input Devices
Buses     3 ISA (16-bit, 16MB/sec)      Keyboard P/S 2 101 kybd
          2 PCI (32-bit, 132MB/sec)     Mouse  P/S 2,
                                        Microsoft Compatible
          (1 Shared ISA/PCI slot)
SCSI      10MB/sec. SCSI-2, PCI         Display Options
Ethernet  10Mbits/sec. PCI              SVGA 1024x768, 60Hz, 14"
Parallel  1 Centronics Compatible       SVGA 1280x1024, 72Hz, 17"
Serial    2 RS232C                      SVGA 1280x1024, 72Hz, 20"
Floppy    IBM Compatible

            Supported Operating Systems Software

Windows-NT 3.1 & 3.5
OSF/1     (available in July)

   * Dependent upon the availability of microprocessors.
   @ Estimated SPEC numbers

Please call regarding pricing or configurations.
We are currently looking for OEMS/VARS and Resellers.

NekoTech (InCo, headquarters)           NekoTech (Branch Office)
102 Tide Mill Rd Suite 6                9272 Jeronimo Rd
Hampton, NH 03842                       Irvine, CA 92718
ph:603-926-0300                         ph:714-580-0055
fax:603-926-0301                        fax:714-580-0060
e-mail:sjg@world.std.com

 ============================================================
 From the  'New Product Information'  Electronic News Service
 ============================================================
 This information was processed from data provided by the
 above mentioned company. For additional details, contact 
 the company at the address or telephone number indicated.
 OmniPage Pro is now used for converting all printed input! 
 ============================================================
 All submissions for this service should be addressed to:
 BAKER ENTERPRISES,  20 Ferro Dr,  Sewell, NJ  08080  U.S.A.
 Email: RBakerPC (AOL/Delphi), rbakerpc@delphi.com (Internet)
 ============================================================
