		     WindowMagic Version 2.0 [Shareware]

       This software package is SHAREWARE. This means an author or 
       programmer has prepared software which you are free to copy, and
       share with others, but the author requests a REGISTRATION FEE 
       for you to continue LEGAL use and receive additional benefits. If 
       you received this software from a shareware vendor or computer club 
       who charged $3 or $4 you have only paid a DISTRIBUTION or HANDLING 
       FEE to produce an EVALUATION disk of which NO PORTION goes to the 
       author of the software. You are encouraged to use the software and, 
       pay the final REGISTRATION FEE to the author to become legally 
       registered and receive further benefits specified below. Unregistered 
       users may examine, search and evaluate the program.

		TO BECOME REGISTERED PLEASE PRINT AND FILL OUT THE ORDER.TXT 
		    OR CALL (206) 882-1530 FOR VISA & MC Orders

			Registered users will  receive:

		  * Over 3800 Icons sorted in Icon Palettes, 
		  * Technical support   
		  * Eliminates annoying NAG screen
		  * Notification of New Products and special update pricing
		  * Full Documentation

	  Paying the registration fee brings by return mail the UPDATED 
	  Program, and the Icon Palette Libraries.


Introduction & Welcome

Thank you for previewing WindowMagic Shareware, The productivity enhancement 
tool for Windows. You are joining a world wide group of satisfied customers who
use WindowMagic every day to enhance their Windows environment.

The first Windows program you and your colleagues ever used was the Program 
Manager. You are probably very comfortable and knowledgeable about the Program 
Manager, however as you may have noticed there are certain inconsistencies, and
missing features in the Program Managers design.

There used to be one solution to this problem, purchase an expensive new type of 
"Program Manager" from a third party vendor.  Unfortunately besides being costly
it requires you to learn an entirely new way of doing things. WindowMagic 
finally provides you with a low cost, easy to use solution to this dilemma.     

WindowMagic extends and enhances the capabilities of the Program Manager instead
of trying to replace it.  WindowMagic seemlessly integrates itself with the 
Program Manager, fixes a major inconsistency, enhances a number of features, and
teaches an old dog a few new tricks. Although the Program Manager is greatly
enhanced by the addition of WindowMagic, you are not required to relearn any of
the skills you previously acquired. Everything still works like it used to, you
just have a few more features at your disposal. 
  
Please take a few moments to read the users guide so that you are familiar with
WindowMagic and all that it has to offer.
 
We at WinWear are committed to enhancing the environment of our users while 
offering quality products, at affordable prices. We will continue to add new
features to the product, and to enhance the existing features in order to make
the Windows environment more intuitive and productive than ever.

We would also like to hear from you, should you have any comments regarding
WindowMagic, or any suggestions on how we could improve the product, or new
features you would like to see implemented.  

If  you have any suggestions or comments please write to:

					WinWear
				14150 N.E. 20th St. Box 346
				     Bellevue WA 98007
				  ATT:  Customer Service

Once Again Thank you for previewing WindowMagic Shareware, and we hope you 
enjoy your state of the art productivity enhancement tool, and decide to 
register your product to receive all the benefits of WindowMagic.



REGISTRATION

After installing WindowMagic and deciding to register your copy please print 
and fill out the ORDER.TXT file or call (206) 882-1530 for Visa or MC orders.  
Only by registering your product can you be assured of getting timely 
technical support, product update announcements, and enhancement information.



System Requirements

Please be sure your computer meets the appropriate operational requirements 
listed below. To  use WindowMagic on your Windows 3.1 compatible desktop, 
portable or notebook computer, you need.

	*  Windows Version 3.1 and the Program Manager installed as your shell
	*  256k of free hard disk space for the WindowMagic Program
	*  3.5 MB of free hard disk space for Icons.
	*  A Windows-compatible mouse or pointing device.

WINDOWMAGIC DOES NOT WORK WITH NORTON DESKTOP OR ANY OTHER SHELL AT THIS TIME.
YOU MUST BE USING THE PROGRAM MANAGER AS YOUR SHELL. IF YOU ARE USING ANOTHER 
SHELL OTHER THAN PROGRAM MANAGER AND WOULD LIKE TO BE INFORMED OF OUR FUTURE 
RELEASES THAT WORK WITH ADDITIONAL SHELLS PLEASE DROP US A NOTE AND WE WILL
DO OUR BEST TO ACCOMMODATE YOU SOMETIME IN THE FUTURE.




















Quick Start

This Chapter provides a brief introduction to WindowMagic.  Please read this
chapter to get started immediately.

To access WindowMagic:

1. Start Windows.

2. If you have not already done so please follow the instructions in Install.txt 
   Once started a 'WindowMagic' menu option will appear between the 'File' and 
   'Option' items on the program managers menu bar. If you followed the 
   instructions WindowMagic should have been added to your ' Startup' group and 
   therefore will start every time Windows is loaded, no user interaction is 
   required. If WindowMagic does not start, or if you disabled WindowMagic, 
   simply open the 'Startup' group and double click on the WindowMagic Icon.
	 


WindowMagic Menu Overview

1.      Select the 'WindowMagic' menu item from the Program Manager menu bar.
	or simply press [Alt M] and the WindowMagic sub menu will open.


2.      Notice that the WindowMagic sub menu has 7 selections all of which 
	can be accessed with your pointing device. Of the 7 selections 6 may be
	accessed with the hot keys designated next to each selection. 
	( a hot key may be executed by first holding down the 'Alt' key and then 
	the key designated to the right of it.)

	Example: Holding down the  'Alt'  key, while simultaneously pressing 
	the 'V' key would automatically launch the Icon Palette Manager. 


	Here is a brief  explanation of each feature and its function,

	FEATURE                  HOT KEY         FUNCTION

	1. Launch Toolgroup     Alt+L           Launches a Toolgroup
	2. View Icon Palette:.. Alt+V           Open Icon Palette Manager
	3. Create Icon Palette. Alt+C           Create a Icon Palette   
	4. Options...           Alt+O           WindowMagic Options On/Off
	5. Window Magic Help    Alt+P           Starts WindowMagic help         
	6. About WindowMagic    Alt+A           Displays the About Box.
	7. Disable WindowMagic  Alt+D           Disables WindowMagic 



Using WindowMagic

Launching a ToolGroup

1.      Select the "WindowMagic" menu item from the Program Manager menu.
2.      Select the "Launch ToolGroup" menu item from the WindowMagic sub menu, 
	and a drop down list that includes all of your current program manager
	groups will appear.


3.      Select the group that you would like create a ToolGroup for. If the 
	ToolGroup was created previously then it will be displayed in its last 
	position and size. If the ToolGroup is being created for the first time 
	then the ToolGroup options dialog box will appear. 

4.      Notice that there are several options available when creating a 
	ToolGroup. Each option is selectable by the user when creating the 
	ToolGroup and may be modified by the user after the ToolGroup  is 
	created. A mark in the box to the left of the option designates it is 
	selected. If there is not a mark in the box to the left of the option 
	it is not selected. A brief explanation of each option is listed.

		OPTIONS                         FUNCTION

1. Display When Windows Starts          If this option is selected the ToolGroup
					will open when Windows starts. It will
					remember  it's last displayed location
					and size.
														     
2. Always on top                        If this option is selected the ToolGroup
					will always be displayed on top of other
					windows. This is useful if you have a
					ToolGroup of favorite functions that you
					want available at all times.

3. Display Format Options               These options are used to designate
					how your ToolGroup is displayed.  Each
					ToolGroup maintains it's own custom
					display options.
 
(If you should decide to cancel this operation use your mouse to select Cancel)


A. Horizontal Rows                      This option displays the ToolGroup as a
					set of horizontal rows that contain push
					buttons.  By selecting the number of
					rows you can determine the size and
					shape of the ToolGroup.

B. Vertical Rows                        This option displays the ToolGroup as a
					set  of  vertical rows that contain push
					buttons. By selecting the number of 
					rows you can determine the size and
					shape of the ToolGroup.  The valid
					number of rows for a ToolGroup is from
					1 to 5.

C. List                                 This option displays the ToolGroup as a
					vertical list of push buttons that are                                                          
					accompanied by the name of the program. 
					The rows entry field is disabled for 
					this selection.

4. Once you have set the options for the ToolGroup use your mouse or pointing 
   device to select OK or press return. and the ToolGroup will appear.
 
(If you should decide to cancel this operation use your mouse to select Cancel)



5. You will now have created a ToolGroup. Notice that the ToolGroup contains 
each program that was in the selected group. To execute a program from the 
ToolGroup, simply position your cursor over the associated Icon and press the 
left mouse key and the program will launch. You may change the position of the 
ToolGroup on your screen by positioning your cursor on the Title bar and 
pressing the left mouse button. While continuing to press the left mouse 
button move your ToolGroup to the desired location and then release the left 
mouse button.


QUICK HINTS:
    If your really anxious to see the options available for the ToolGroups 
    here are a few Quick hints to get you started;

A.  Select the System menu box in the upper left-hand corner of the ToolGroup 
    and a list of options will be displayed. 

B.  By double clicking on the Title bar of the ToolGroup with the left mouse 
    button you will change the way the ToolGroup is displayed. Example; If your 
    ToolGroup currently displayed Horizontally then double click on the Title 
    bar and it will now display vertically, Double click on the Title Bar again 
    and the ToolGroup will display Vertically with a list, Double click again 
    and your ToolGroup will once again be displayed horizontally.

C.  By positioning your cursor on the Title bar of the ToolGroup and holding 
    down the right mouse button you will activate the QuickAccess feature. 

View Icon Palette

1.      Select the [WindowMagic] menu item from the Program Manager menu.
2.      Select the [View Icon Palette] menu item from the [WindowMagic] menu, or
	press "Alt+V" to go directly to the 'View Icon Palette' dialog.
3.      After selecting the " View Icon Palette" entry the palette selection 
	dialog will appear.
4.      Select a WMP palette, exe or dll file from the displayed list of files.

Should you decide that you would like to cancel the operation, simply press
the 'Cancel' button.  Help is also available for this dialog by pressing the 
help button.


Customizing a Group or Application Icon

1.  After selecting a palette you wish to view, a window will be created that 
displays all of the icons stored in that file.  This window is referred to as 
an icon palette.

2.  To assign an icon to a program manager Group or Application icon first 
position your cursor over the icon in the palette you wish to select 
(the cursor changes to a hand).

3.  Next click and hold the left mouse button (the cursor changes to a black
and white representation of the selected icon),  drag the mouse cursor 
(while continuing to hold down the left mouse button) into position over the 
top of the Group or Application icon you wish to customize and release the 
mouse button.  The Group or Application icon will immediately be replaced by
the new icon you have chosen.



NOTE:    
   As you move outside of the Palette the cursor changes to a circle with a 
   slash through it, this signifies that it is an illegal 'Drop Zone'.  If 
   you release the mouse button while the cursor is over an illegal zone no
   action will take place.

NOTE:   
   You may change the position of the Palette on your screen by positioning 
   your cursor on the Title bar and pressing the left mouse button. While 
   pressing the left mouse button move your Palette to the desired location
   and then release the left mouse button. 


Create Icon Palette

1.      Select the 'WindowMagic' menu item from the Program Manager menu.
2.      Select the 'Create Icon Palette' selection from the WindowMagic menu, or
	press 'Alt+C' to go directly to the 'Create Icon Palette' dialog.
3.      After selecting the " Create Icon Palette" menu entry,  the palette 
	creation dialog will appear. 
4.      Next type in a unique name for the palette, the name may contain up to 
	eight characters, but must not contain a file extension. 
		
NOTE: 
  If you type in a Palette that already exist then WindowMagic will prompt you 
  with a "Palette Overwrite Warning" and will then ask if you want proceed?  If 
  you answer no, the system will request that you enter a new name.  If you 
  answer yes, the system will open the new palette and destroy the contents of
  the old palette.

6.      Now your new Palette will be displayed. You will notice that when your 
	new palette is opened it is empty. By selecting the System menu box in 
	the upper left hand corner of the "Palette" a menu will appear that will
	allow you to: Move, Minimize, Import, Delete, Access Help, or Close 
	the Palette.

NOTE:   
  To Close the Palette Manager, simply click on  box in the upper left hand 
  corner of the palette and select "Close" or press "Alt+F4" 


WindowMagic Options

1.      Select the 'WindowMagic' menu item from the Program Manager menu.

2.      Select the Options' selection from the WindowMagic menu.
	You will notice that there are three (3) selections available under 
	the options menu. All of these selections allow the user to turn 
	On/Off specific parts of WindowMagic and to bring up the QuickAccess
	customization dialog

3.      To select one of the options position your cursor over the selection 
	while holding down the left hand mouse button and then release the left 
	hand mouse button. 

A.      QuickAccess                     'Alt+Q' Brings up the QuickAccess
						customization dialog

B.      Group Icon Customizer           'Alt+G' Group Icon Customizer On/Off

C.      Windows Exit Enhancement        'Alt+E' Windows Exit ehancement On/Off

	You may have noticed that the entries have a green check mark next to 
	them. This signifies that the feature is currently enabled, but has the
	ability to be disabled at the your discretion.  If the feature was 
	disabled the check mark would be replaced with a red circle with a 
	diagonal slash mark.  This flexibility lets you pick and choose which 
	enhancements to use.  This is allows you to use a layered approach to 
	enhancing your Windows environment.





QuickAccess
 
The "Quick Access" function brings up the QuickAccess customization dialog. This
is where you can customize the "Quick Access" and 'FastLaunch' functions or 
disable them. This selection must be activated in order for you to use 
"Quick Access"  To access this with the hot key use the "Alt+Q" key sequence.

1.      Select the 'WindowMagic' menu item from the Program Manager menu.
2.      Select the Options' selection from the WindowMagic menu.
3.      Select the QuickAccess menu item or use the hot key 'Alt+Q'
4.      You will then see a dialog box
5.      There are three (3) different sections to this dialog box.  Use, Sort By, 
	and QuickAccess Activation Keys.

To Select or De-Select any option use your mouse or pointing device to position 
your cursor on top of the selection area and click your left mouse button once. 
Doing this should cause the selection area to become blank ( option disabled) or
filled in ( option enabled)

Section 1       Use

		QuickAccess     By clicking on the box to the left of the 
				QuickAccess option a check mark appears 
				inside the box designating the QuickAccess 
				function to be enabled To Disable QuickAccess 
				simply click on the box to the left of the
				QuickAccess option and when the box is empty 
				the QuickAccess function is disabled FastLaunch
				By clicking on the box to the left of the 
				FastLaunc option a check mark appears inside 
				the box designating the FastLaunch function to 
				be enabled. To Disable FastLaunch simply click 
				on the box to the left of the FastLaunch option 
				and when the box is empty the FastLaunch 
				function is disabled 
NOTE:    
  You must have QuickAccess enabled in order to use FastLaunch.









Section 2       Sort By.                        
		
		Last Used       This directly affects the way QuickAccess sorts 
				the applications. Selecting Last Used method 
				will cause the applications that were most 
				recently used to be displayed at the top of the 
				list
 

	Alphabetical Order
				This Directly effects the way QuickAccess sorts 
				the applications. The QuickAccess list will be 
				displayed in alphabetical order.





Section 3       QuickAccess Activation keys

This selection allows you to customize the way that you activate QuickAccess. 
If you decide to use the left mouse button, instead of the default right mouse
button you must also select a mode key. A mode key is a key that must be 
pressed and held in combination with the mouse button.

Using QuickAccess

QuickAccess gives you the power to launch an application from a minimized 
group. This allows you to minimize all of your groups and better organize your
work space. You simply click and hold the right mouse button while the cursor 
is over a minimized group icon to activate the QuickAccess menu.

A menu of all applications contained within the group is displayed in 
alphabetical order (sorting by usage is also supported)  Highlighting an 
application and then releasing the mouse key launches the application.  
QuickAccess supports Program Managers file association and minimize on 
use features.  

Another feature of the QuickAccess system is FastLaunch.  FastLaunch lets 
you select your favorite or most commonly used application from each group 
that is always available by simply double clicking on the minimized group. 
( notice the lighting bolt for the first menu entry, this designates your 
FastLaunch choice for the selected group)  This eliminates the need to open 
the group, or to use the QuickAccess menu for your most commonly used 
applications.

After using QuickAccess and FastLaunch most people never go back to the 
"Microsoft Shuffle" way of doing things.













Group Icon Customizer

The "Group Icon Customizer" menu selection toggles on and off the ability 
to display a custom icon for a Program Manager group. 

This selection must be enabled in order for you to see the customizations 
you have made to the Program Managers group icons.  If you would like to 
disable this function at any time, simply access the WindowMagic menu and 
select the Options menu and then the "Group Icon Customizer" 
menu entry. 

This option only affects whether or not the customized groups are displayed, 
so don't worry about losing any changes you may have made. WindowMagic will 
remember what Icons were attached to your Program Manager groups, Simply 
re-enable the Customization option and the Icons that were previously 
selected for your Groups will reappear! To select this function with a 
hot key keys use the "Alt+G" key sequence.


Windows Exit Enhancement

The "Windows Exit Enhancement" menu item toggles On and Off the ability 
to use the "Windows Exit Enhancement" feature.  If you would like to 
disable this function and use the standard Windows exit dialog, simply 
access the WindowMagic menu and select the Options menu then select the 
"Windows Exit Enhancement" menu entry.  

To re-enable the "Windows Exit Enhancement" feature simply access the 
WindowMagic menu and select the Options Menu then select the 
"Windows Exit Enhancement" menu entry and the ability to utilize the 
function will be re-enabled.  To toggle this feature with the hot key 
use the "Alt+E" key sequence.






Using Enhanced Exit

Being a Windows user you know that occasionally you want to exit and 
then immediately restart Windows, or possibly re-boot your machine. 
You might want to do this when you receive a program error, or maybe 
you just want to start fresh. WindowMagic makes this simple and easy 
by providing an enhanced exit dialog that replaces the 
Program Managers.  

Additionally all exit features are accessible without bringing up the 
dialog by using the ALT-X, ALT-R, or ALT-B hot key sequences 
respectively.  This allows for a very fast means of exiting Windows 
without using the Program Managers exit dialog.   

Help

The "Help" menu entry displays the help topic available for the 
WindowMagic program If you would like to use help for WindowMagic, 
simply access the WindowMagic menu and select the "WindowMagic Help" 
Menu item and the help dialog will appear.

About WindowMagic

The "About WindowMagic" menu entry displays the:  Registered user, 
Version Number, Serial Number. and WinWear's telephone number so you 
can tell all your friends what a great product WindowMagic is, or 
report a problem.  If you would like to view the "About WindowMagic" 
screen, simply access the WindowMagic menu and select the 
"About WindowMagic" menu item and the "About WindowMagic " 
dialog will appear.

Disable WindowMagic

The "Disable WindowMagic" menu entry disables WindowMagic until 
you restart Windows or restart WindowMagic.  If you would like to 
disable WindowMagic, then simply access the WindowMagic menu 
and select the "Disable WindowMagic" menu entry, or use the "Alt+D" hot 
key sequence. 



END....

WindowMagic Version 2.00 Shareware.

To Register print and fill out ORDER.TXT
