October 28, 1993 -- A new software program that converts an IBM compatible
computer into a fully functinoal logic analyzer has been introduced by
Logixell Electroncs. With The Real Logic Analyzer version 2.0, up to five
digital waveforms can be monitored through the standard PC parallel
printer port. The user can connect a circuit to the port by making a
simple cable or by using Logixel's optional cable with universal test
clips. The software uses the computer's memory to capture 64K sampes of
data at speeds of up to 1.2 uS (depending on computer). Full triggering
capabilities allow for the trigger word to be set to any combination of
High, Low or Don't Care values. The trigger point may be set anywhere
within the 64K buffer to allow for capturing of both pre- and post-trigger
waveforms. Captured waveforms are displayed graphically on the computer
screen and can be viewed at several different zoom levels. A continuous
display mode allows for an "Oscilloscope" type of real time display. For
independent cursors and an automatic time base calibration routine allows
for accurate time and frequency measurements to be taken. Glitches can
also be detected by oversampling the printer port. The displayed waveforms
may be assigned a seven character label for identification and may be
displayed in any color or arranged in any order on the screen. The
captured waveforms may be saved, printed or exported in PCX file format.

The Real Logic Analyzer comes with a 36 page instruction manual and program
diskette for only $79.95 (US). The optional Test Cable sells for $22.95
(US).

LOGIXELL Electroncis
61 Piper Cr.
Kanata, Ontario CANADA K2K 2S9
613-599-7088,  fax 613-599-7089

 ============================================================
 From the  'New Product Information'  Electronic News Service
 ============================================================
 This information was processed from data provided by the
 above mentioned company. For additional details, contact 
 the company at the address or telephone number indicated.
 OmniPage Pro is now used for converting all printed input! 
 ============================================================
 All submissions for this service should be addressed to:
 BAKER ENTERPRISES,  20 Ferro Dr,  Sewell, NJ  08080  U.S.A.
 Email: RBakerPC (AOL/Delphi), rbakerpc@delphi.com (Internet)
 ============================================================
