AUTOMATION MASTER
REAL TIME SIMULATION SOFTWARE

Automation Master is a full featured modeling tool which mimics the
operation of automated factories or warehouses controlled by one or more
PLCs to:

    . Debug control software.
    . Eliminate downtime.
    . Improve startup safety.
    . Train operators.

With Automation Master you can play "what if" games to test control
strategies.  Equipment damage during system start-ups is reduced by
thoroughly testing control systems in the laboratory prior to their
installation in the field.

Performance at capacities which may not be reached for years is assured
since the automated system can be tested under any conditions using real
time simulation.  Automation Master can reduce the field debugging cost of
control software by 90%.

Automation Master runs on a standard PC with VGA graphics.  A demonstration
disk is available from:

HEI Corporation
P.O. Box 88806, Carol Stream IL 60188
Phone: 708-665-5500,  Fax: 708-665-5769

 ============================================================
 From the  'New Product Information'  Electronic News Service
 ============================================================
 This information was processed from data provided by the
 above mentioned company. For additional details, contact 
 the company at the address or telephone number indicated.
 OmniPage Pro is now used for converting all printed input! 
 ============================================================
 All submissions for this service should be addressed to:
 BAKER ENTERPRISES,  20 Ferro Dr,  Sewell, NJ  08080  U.S.A.
 Email: RBakerPC (AOL/Delphi), rbakerpc@delphi.com (Internet)
 ============================================================
