VISIONETICS INTRODUCES VIGA GENLOCK+ ADVANCED VGA-TO-VIDEO GENLOCK/OVERLAY
CARD WITH BUILT-IN VGA CAPABILITIES FOR THE PC

March 1994 -- Visionetics International Corp.'s (Visionetics') VIGA
Genlock+ is a VGA-to-Video overlay board with built-in Super VGA
capabilities for the IBM PC/AT, 386 and 486 systems. This revised version
has several additional features that are not found on the VIGA Genlock
card. This videographics board allows users to display graphics up to
1024x768 resolution in interlaced and non-interlaced modes, and up to
32,768 colors.

VIGA Genlock+ is a single-slot, single-board solution designed with a Super
VGA card, and VGA-to-video overlay card combined into one. With built-in
genlock/overlay, the board accepts and outputs signals from the VCRs and
other video devices. It is a one board solution for users who wish to
create VGA graphics, run animation, mix both together with incoming video,
and record the production to video. VIGA Genlock+'s new features include:

An advanced Anti-Flicker Filter enhances the crispness and clearness of the
VGA text, and graphics on a television or video monitor by reducing the
flicker normally associated with interlaced video graphics. Users can
output to video Microsoft Windows with little or no quality degradation.

VIGA Genlock+ provides simultaneous display of non-interlaced VGA, and
interlaced composite and S-VHS video signals so you can view your
production. This advanced technology eliminates the need for expensive and
outdated monitors.

A component video (R-Y, B-Y, Y) option is available for high end broadcast
or video production use.

VIGA Genlock+ is 100% BIOS, and register compatible in all standard VGA
modes. It provides Super VGA graphics resolutions up to 1024x768, and up
to 32,768 colors. There is no distortion to the VGA output signal when the
board is connected to a video output source. In addition, the circuit is
designed to support overscan and underscan, therefore, users can output
full 80 column text to NTSC. There are drivers for popular software such
as Microsoft Windows, GEM, Ventura, AutoCAD, Lotus and WordPerfect. It
also has a driver for the VESA standard.

VIGA Genlock+ uses Tseng Lab's ET4000AX chip set, and is supplied with 1
MByte DRAM on board. It is immediately available from Visionetics. VIGA
Genlock+ has a retail price of $595.00, and comes with a full one year
warranty. VIGA Genlock+ is also available in a PAL version.

Visionetics International Corporation was formed in 1983, and is the first
manufacturer of microcomputer-based imaging products based in the
high-tech oriented Hsinchu Science Park in Taiwan. Visionetics designs'
products that serve as a link between the video and computers.

For additional information, contact Visionetics at 21311 Hawthorne Blvd.,
Suite 300, Torrance, CA 90503. Telephone: (310) 316-7940 or facsimile:
(310) 316-7457.

 ============================================================
 From the  'New Product Information'  Electronic News Service
 ============================================================
 This information was processed from data provided by the
 above mentioned company. For additional details, contact 
 the company at the address or telephone number indicated.
 OmniPage Pro is now used for converting all printed input! 
 ============================================================
 All submissions for this service should be addressed to:
 BAKER ENTERPRISES,  20 Ferro Dr,  Sewell, NJ  08080  U.S.A.
 Email: RBakerPC (AOL/Delphi), rbakerpc@delphi.com (Internet)
 ============================================================
