The SIMM Remover:

The SIMM Remover makes memory upgrading user-friendly. Many upgraders
currently damage the SIMM sockets while trying to extract old SIMMs. This
means costly repairs to the motherboard. In addition, many sockets are
difficult to disengage, especially when they are located in hard-to-reach
areas. The SIMM Remover is the solution to these problems:

                 Works with all SIMM sockets
                 Automatically extracts SIMMs
                 Eliminates risk of damage to the computer

                 Permanent Anti-Static material
                 Simple, one-handed operation
                 Instructions included

More information on the SIMM Remover:

The SIMM Remover is a hand-held tool that slides over the edges of the
SIMM, disengaging the socket's latches. The SIMM remover automatically
snaps into the holes in the SIMM to assure extraction. It is made of ABS
that is permanently anti-static, so it won't accumulate charge or directly
transmit charge. Its largest dimensions are 3.64 x 2.17 x .24 inches.

The SIMM Remover is designed for 30 position SIMMs, with chips on one or
both sides. The SIMM Remover works on vertical, low profile, or right
angle sockets. It works on metal latches and plastic tab latches. (On a
fraction of sockets with push down" latches , the SIMM Remover will
execute all but the lifting of the card). Finally, the SIMM Remover works
for single or dual sockets, regardless of centerline spacing.

Price:  $9.95 each + S&H

For more information or to purchase contact:

Stratos Product Development Group
2025 First Avenue
Market Place Tower PH-B
Seattle, WA 98121 USA
(206) 448-1388
(206) 448-7830 fax
info@spdg.com

Also see our web page at:

http://www.hitl.washington.edu/consortium/stratos/

 ============================================================
 From the  'New Product News'  Electronic News Service on....
 AOL (Keyword = New Products) & Delphi (GO COMPUTING PRODUCT)
 ============================================================
 This information was processed from data provided by the 
 company or author mentioned. For additional details, please 
 contact them directly at the address/phone number indicated.
 All trademarks are the property of their respective owners.
 ============================================================
 All submissions for this service should be addressed to:
 BAKER ENTERPRISES,  20 Ferro Dr,  Sewell, NJ  08080  U.S.A.
 Email: RBakerPC (AOL/Delphi), rbakerpc@delphi.com (Internet)
 ============================================================
