
Directions to create Setup disks for Homecon.exe 

Congrats,
Attached is version 1.1d of the Ultimate Home Contractors and Remodelers Job
 and Cost tracker.
The file, Homecont.exe is a self extracting file that will create two more 
files called homecon1.exe and homecon2.exe.

When these two files are extracted, you must extract them to 2 other disks
to create the setup program.

Label a Blank 1.44 Formatted disk "HomeCon1", put it into the drive you which
 to extract the main setup program to and type :

                      homecon1.exe a:\ (Where a is the drive)

Put another 1.44 disk in the drive, labeled HomeCon2 and type
                     Homecon2.exe a:\

At this point you have extrcted the two setup disks.

From your Windows File|Run menu put disk 1 in the drive and run setup.

You will then follow the prompts to extract this wonderful program.

Disk 1 contains the VBXs and DLLs which are needed to run the program,
But which you may already have.  Disk2 contains the Homecon program, 
INI file, Manual and VBXs and DLLs that needed by this program.

Good luck and please let me know how you like the program.

You can reach us via the internet at Gerold@li.net or by 
phone at 516-759-4219 or by Fax at 516-759-4229.

Homecon1 contains the following VBXs and DLLs

Cmdialog.vb_
Commdlg.dl_
Ctl3d.dl_
Grid.vb_
Msaes110.dl_
Msafinx.dl_
Msajt110.dl_
Msajt200.dl_
Msoutlin.vb_
Threed.vb_
Vbdb300.dl_

Setup.exe        

Setup.exe will requir both disk1
and disk2 when it goes to run setup.

If you have these VBXs and DLLs then run
Setup from disk2 which will only include
the files from Disk2 which are the Following

Homecon.ex_	HomeCon Program
Homecon.in_	Homecon.ini file
Dbttip.vb_	Ballon Help tip VBX
Keystat.vb_	KeyStatus VBX
mhinrel.vb_	Real Number VBX
mhrun400.dl_	MH Dll 
msghook.vb_	Message for menu

Setup.exe	Setup to install only disk 2
readme.txt	This file
manual.doc	WinWord 6.0 Manual

