164      
                           S T R A T - T E C H,  Inc.
                                 P.O. Box 1957
                          Milwaukee, Wisconsin 53201
                                 414-271-0980
                                 800-783-9544
      
      
   FAST START INFORMATION FOR NEW USERS:
   (If you already use an earlier version of the program do NOT copy your 
   data files per below - this destroys existing data which you entered - 
   see OLD USERS below).
         
   For a floppy drive system- Boot Dos per your Dos manual --Insert the 
   Program Disk in drive a: -- Use your diskcopy command to make a backup 
   copy: diskcopy a: a: .  Repeat for the Log/Library Disk (If 360K used)
   if you receive extra log/library disk.
          
   For a hard drive system- Insert Program Disk in Drive a: -- Make a 
   directory such as 'Fish' or 'Hunt' with the command: md c:\fish - Copy 
   files to this directory:  copy a:\*.* c:\fish. Repeat for Log/Library 
   disk (if 360K disks or if special log/library disks received).
      
   OLD USERS:
   For Hard Drive Users- The only old files which you want to reuse (not copy 
   new) are files without an extension (the three letters after the first 
   eight) in the file name e.g. 'equipmen' or 'packing', and for which you 
   have data entered already.  Use the command 'XCOPY a:\*.* c:\fish /P' 
   to selectively choose files to copy over to the same directory as you 
   used before.  The /P option of XCOPY is important; it causes XCOPY to 
   ask you before it copies a file. 
      
   For floppy drive users- Use the instructions for NEW USERS but 
   use different disks to hold your data.  Then when finished insert your 
   old disk in drive a: and copy the data files which you have already 
   entered your data in.  The data files have no extension, for example, 
   'equipmen' or 'packing' or 'recipes'.  Use the command "copy a:\recipes 
   b:", where 'recipes' is a file you have data in and b: contains the new 
   program files.  Use the 'dir a:\*.' command to find their names.
      
   TO RUN THE PROGRAM:

   For floppy drive systems- Insert the program disk in drive a: or b:. 
   Type in a: or b: as appropriate and press enter.  Type in 'fish' and
   Enter to bring the system up.   Read the 'Info.txt' library 
   file to see how to use multiple disks when entered data gets large.      
   
   For a hard drive- type in command 'cd c:\fish' and press enter.
   (Substitute the directory name you use); then type 'fish' and enter 
   to run the program.  
   
   ---------------------------------------------------------
   YOU MUST GO INTO SECTION 1 FIRST TO SET THE CORRECT PATH.   
   ---------------------------------------------------------
   
   Note: The files with the extension '.dba', 'dat', and 'cfg' must be in 
   the same directory or path as the '.exe' program i.e. fish.exe, in order 
   to bring the opening menu up.  
