                                              _______
                                         ____|__     |               (R)
          HammerSoft                  --|       |    |-------------------
          PO Box 205                    |   ____|__  |  Association of
     Kansas, OH 44841-0205              |  |       |_|  Shareware
   Voice/Fax: (419) 986-6007            |__|   o   |    Professionals
                                      -----|   |   |---------------------
                                           |___|___|    MEMBER





                             ASSET LIMITATION
   **** NOTE ****  This shareware version is limited to 50 Assets.


                                INSTALLATION

   To  conserve  space, the Fixed Asset Pro  disk(s)  contain  compressed
   versions of Fixed Asset Pro program files.
   Fixed  Asset Pro requires a hard disk with at least 2 MB of free  disk
   space  for  installation.  The  Fixed  Asset  Pro  program  will   use
   approximately 1.5 MB of disk space after it is installed.

   The  first time you run Fixed Asset Pro you will be asked for  a  data
   subdirectory.  We recommend that you keep your data in a  subdirectory
   other than the FApro subdirectory. The default is "Prodata".

   Fixed Asset Pro installation is simple as 1 2 3.
        1) Insert disk 1 into the correct drive for the disk(s)
           (5-1/4 or 3-1/2).
        2) If you put the disk in A: then at the DOS prompt type
             A:Install
           If you put the disk in B: then at the DOS prompt type
             B:Install
           Press <Enter>.
        3) Follow the onscreen prompts while Install steps you
           through the installation.
   When the Install program is finished, you can start Fixed Asset Pro by
   typing:   FApro <Enter>.
   If you need Black & White mode type:   FApro M  <Enter>

   For  those who like to do their own installations, the files are  self
   extracting.  You may copy the  two  files (FAproA.Exe,  FAproB.Exe) to
   a subdirectory on your  hard drive using the  DOS  Copy  command.  The
   recommended subdirectory name is "FApro". Once you have copied the two
   files into  your subdirectory  just run FAproA  and FAproB to  extract
   all the files. After both programs have finished you should delete the
   two  files (FAproA.Exe,  FAproB.Exe)  from  your  subdirectory.  Fixed
   Asset Pro requires that  the FILES= statement in your  Config.Sys file
   be set  to 30 or greater.
