     Most  of  the  time, there is no need to use a  bps  above  19,200bps.
Unless the data is very structured or has lots of empty space (database  or
spreadsheet)  the compression won't get you over 19,200bps. When the  modem
refuses  to work above 19,200 or doesn't work well, it is usually  hardware
on  the  computer (slow serial port or some other conflict even on  a  fast
computer).  Set  the software and dialing directory for  19200.  Make  sure
CTS/RTS  flow  is=ON.  And locked DTE (baud/bps) rate  (software  does  NOY
follow modem connect speed).

     On the other hand, never set the modem BELOW 19,200 either. If you get
a  12,000  or 14,400 connect the software and modem may not speak  to  each
other correctly.

     The  phone company claims the bandwidth of the phone lines  will  only
support 9600. Most of the time, from most locations we know from experience
that  often  14,400 or 12,000 can actually be acheived.  However  when  the
connections  for whatever reason won't support the faster speed, it  should
come  as no surprise. Sometimes you can force a higher than  9600  connect,
and  get  some (or a lot) of garbage characters. When the  connect  is  TOO
poor,  the modems will not even stay connected. In such a case use  one  of
the 9600 dial prefixes (insert or pp11-7 or 10-7).

                                   Don Hinds - Zoom Tech
##include=c:\text\signa.tif
