     Using  Faxman  -  Faxman must be loaded
                                                   C:\MTEZ>faxman

to  recv or send a fax. If you get an Error and it doesn't load  check  the
Faxman Setup. Faxman will use EMS if available.
                                                    C:\MTEZ>setup

and  see if the port is set correctly there. When Faxman is loaded  you  do
not have to do anything else to recv a fax. (but you must NOT be in MTEZ in
data mode, or AutoAnswer or Host). If Faxman isn't loaded you cannot change
TYPE  in the dialing directory to FAX. If EMS is enabled Faxman  will  load
most of itself there if the option is checked in SETUP, saving conventional
memory.
     In  theory, Faxman will receive faxes or send scheduled faxes  in  the
background  when you're in another application. You will have to test  this
with  YOUR applications. Some are processor and/or memory 'hungry' and  the
fax may fail...

C:\MTEZ>faxman /r

will  remove  Faxman. Faxman must be removed if you are  expecting  a  DATA
call incoming.

     If you got 1-disk MTEZ you can set RINGs in CAS  setup C:\MTEZ>setup
to  6 or more, and manually answer fax (when you pick up the phone  &  hear
the fax 'beeps') with the 'hotkey'
                                        <ctrl><alt>A

     NITELINE is used (loaded after Faxman) when you will be away from  the
computer  and want faxes printed as they are recv'd. It is not a good  idea
to  use NITELINE during the day (unless the PC is dedicated to fax)  as  it
ties up the PC quite a lot.

                                   Don Hinds - Zoom Tech
##include=c:\text\signa.tif
