     Because  of the 'sleep' mode on the Zoom Pocket/modem,  some
software has trouble initializing the modem. If the software uses
CTS/RTS  and  the modem is 'asleep' it will not wake up.  If  you
cannot turn OFF CTS/RTS flow, you can get around this by  turning
the modem OFF, and just before the Init (or dial) turn it ON.  It
will be awake for a few seconds and get initialized (or dialed).

     Also  this  modem  is CLASS-1 fax, and  your  software  must
support and be set for CLASS-1.

     The  MNP  and V42bis for this modem are  provided  via  RPI
(Rockwell  Protocol  Interface).  This is a  new  combination  of
hardware & software.  There is a V42bis.DRV file on the diskette,
and  the  software must recognise RPI for it  to  Interface  that
driver with the modem.
     There  are not very many term programs that support  RPI  for
V42bis. Right now I know of 3.

Comit - by Tradewind - 818-335-7007

MTEZ - from Wordperfect - 801-228-9915

Bitcom Deluxe - Bit Software - 510-490-2928

     The serial # is in the battery compartment.

                                   Don Hinds - Zoom Tech
##include=c:\text\signa.tif
