     Use  POPPRINT  in DOS to fax any non-ASCII file. You run  FAXMAN  then
POPPRINT. Faxman will use EMS if available.

C:\MTEZ>faxman C:\MTEZ>popprint

You  do NOT run MTEZ. From your DOS application (Wordperfect for  example),
You  set up a Printer Driver ( >>>Epson FX85, RX80 or FX80<<< ).  Then  you
press  the  2  <shift> keys which will give a 'beep'. Then PRINT  the  file
with  the  Epson  driver from that application (not  MTEZ).  POPPRINT  will
capture the output, and when done, present a window, ready to fax.

     If the window does not appear, the TEMP directory in SET TEMP= or  SET
TMP=  in  Autoexec.bat  may  not exist (or point  to  a  non-existant  TEMP
directory).  Also  may be TSR problem.  If you get garbage,  you  have  the
wrong Printer Driver in Word Perfect.

     One thing you must also remember, Popprint cannot fax fonts built-into
your printer. Only fonts actually sent TO your printer, or built into MTEZ.

     Popprint  uses  conventional memory only. If you are not going  to  be
using Popprint you may want to remove it, and reload it only as needed.

C:\MTEZ>popprint /r
                         USING FAXMAN
C:\MTEZ>faxman

to  recv or send a fax. If you get an Error and it doesn't load  check  the
Faxman Setup
                    C:\MTEZ>setup

and  see if the port is set correctly there. When Faxman is loaded  you  do
not have to do anything else to recv a fax. (but you must NOT be in MTEZ in
Data Mode, or AutoAnswer or Host). If Faxman isn't loaded you cannot change
TYPE  in the dialing directory to FAX. If EMS is enabled Faxman  will  load
most of itself there, saving conventional memory.

C:\MTEZ>faxman /r

will  remove Faxman. If you got 1-disk MTEZ you can set RINGs in CAS  setup
to  6  or more, and manually answer fax (when you pick up the  phone)  with
<ctrl><alt>A   hotkey. If you have EMS, faxman will use it if you set  that
feild in SETUP.
     NITELINE  is  used  (after  Faxman) when you will  be  away  from  the
computer  and want faxes printed as they are recv'd. It is not a good  idea
to  use NITELINE during the day (unless the PC is dedicated to fax)  as  it
ties up the PC quite a lot.

     Recv'd faxes are GRAPHICS and may be viewed & printed from  Expressfax
menu.

                                   Don      Hinds     -      Zoom      Tech
##include=c:\text\signa.tif
