
     A  LEASED  LINE normally is just an open line with NO  DIALTONE  &  no
RING,  connected at all times. A modem will not AutoAnswer if there  is  no
RING  into  the  modem.  There is a cheap  part,  which  with  a  momentary
pushbutton  & 5vdc input, will output a 5 watt RING, so should work with  a
normal leased line.

##include=ringgen.tif

     You  just  push the button at the same time you dial  with  the  local
modem, and the modem on the other end will AutoAnswer (ATS0=1&W). You  dial
with  ATX1D because there is NO DIALTONE and X1 tells the modem  to  ignore
dialtone.

     Cambridge  Electronics, Sommerville Mass. makes this device.  a  Micro
Module UU-BMR $33, 5-pc $29 (can be had w/ either 5vdc or 12vcd input).
Phone #  617-629-2805.  You can get the push button from Radio Shack.

****************************************************************************

NOTE:  devices added to your phone line should be reported and approved  by
the phone company.

****************************************************************************

                                   Don Hinds - Zoom Tech

##include=c:\text\signa.tif
  