======================================================================
  Microsoft(R) Product Support Services Application Note (Text File)
     WA0942: MAIL REMOTE FOR WINDOWS MAILDRV.EXE 3.2.0.4002 UPDATE
======================================================================
                                                  Revision Date:  4/94
                                                       1 Disk Included

The following information applies to Microsoft Mail Remote for
Windows(TM), version 3.2.

-----------------------------------------------------------------------
| INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY     |
| ACCOMPANY THIS DOCUMENT (collectively referred to as an Application |
| Note) IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER      |
| EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED      |
| WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR       |
| PURPOSE. The user assumes the entire risk as to the accuracy and    |
| the use of this Application Note. This Application Note may be      |
| copied and distributed subject to the following conditions:  1) All |
| text must be copied without modification and all pages must be      |
| included;  2) If software is included, all files on the disk(s)     |
| must be copied without modification (the MS-DOS(R)  utility         |
| diskcopy is appropriate for this purpose);  3) All components of    |
| this Application Note must be distributed together;  and  4) This   |
| Application Note may not be distributed for profit.                 |
|                                                                     |
| Copyright (C) 1993 Microsoft Corporation.  All Rights Reserved.     |
| Microsoft and MS-DOS are registered trademarks and Windows is a     |
| trademark of Microsoft Corporation.                                 |
|---------------------------------------------------------------------|
                                   
Introduction
------------

The disk provided with this Application Note contains MAILDRV.EXE, a
replacement for the MAILDRV.EXE file that is included with version 3.2
of Microsoft Mail Remote for Windows. This update includes the
following modification:

 - When Microsoft Mail Selector (MAILDRV.EXE) loads a driver after
   EFAX has been activated, the driver does not become EFAX aware.
   Therefore, when EFAX is activated, the provider section for the
   EFAX driver is removed from the MSMAIL.INI file in the Windows
   directory. This updated version of the Mail Selector (MAILDRV.EXE)
   makes all the drivers EFAX aware. This ensures that when the driver
   is installed, the EFAX driver is not removed.

   NOTE: Because MAILDRV.EXE looks for the EFAX software, this version
   of MAILDRV.EXE should be installed ONLY on machines running version
   3.11 of Microsoft Windows for Workgroups.

To update your MAILDRV.EXE file
-------------------------------

1. Insert the enclosed WA0942 disk in your floppy disk drive.

2. At the MS-DOS command prompt, type the following and press ENTER

      copy <drive>:\maildrv.exe <destination>

   where <drive> is the floppy disk drive containing the WA0942 disk
   and <destination> is the drive and directory where your MAILDRV.EXE
   file currently resides. For example, if MAILDRV.EXE is located in
   the MSMAIL directory on drive C and the WA0942 disk is in drive A,
   type the following command:

      copy a:\maildrv.exe c:\msmail

   A message will be displayed stating: 1 file(s) copied. This
   indicates that your MAILDRV.EXE file has been successfully
   replaced.