
Suggested directory: /os2/diskutil


            GammaTech Utilities - 32 Bit - Version 3.00
            ReadMe.Csd       CSD 1995066       03/07/95

This diskette contains corrective service for the GammaTech Utilities
Version 3.00. To install the corrective service, follow the steps
below:

1) Stop all GammaTech applications.
2) Click on the "Install" menu item.
3) After installation completes, Start
   the desired GammaTech applications.

Corrective Service files are cumulative. The latest CSD file contains
fixes found in all previous CSD files.

To determine if you need to apply this CSD, execute the GtLevel
command from an OS/2 command prompt. If the CSD level shown there
is less than this CSD level there are fixes here you may wish to
install. A list of fixes and their dates are shown below.


Documentation Errata

Page 46 - The example for FatSort is in error. The starting
directory must always be specified, even for the root. The
example should read as follows:

   FATSORT  D:\  -b-


Corrective Service List

--Date-- --CSD--  Filename    Description
11/26/94 1994330     n/a      Base release
12/15/94 1994349  GTU349.CSD  Service items on or before this date.
12/28/94 1994362  GTU362.CSD  Service items on or before this date.
01/25/95 1995025  GTU512.CSD  Service items on or before this date.
03/07/95 1995066  GTU513.CSD  Service items on or before this date.
03/11/95 1995070  GTU514.CSD  Service items on or before this date.


Analyze
12/14/94  Increased stack size from 16384 to 49152 to correct SYS3171
          on large FAT volumes.

01/02/95  Correct "Help Not Available" error on initialization when
          the source directory name contains embedded blanks.

03/11/95  Increase stack space  for threads from 32768 to 49152 to
          correct trap due to insufficient stack space.

DiskMap
01/02/95  Correct "Help Not Available" error on initialization when
          the source directory name contains embedded blanks.

03/11/95  Increase stack space from 16384 to 32768 to correct trap
          due to insufficient stack space.

FatOpt
12/09/94  Sector numbers in message text were decimal and are now
          hex.

12/14/94  Increased stack size from 8192 to 49152 as a preventive
          measure.

12/28/94  Added debug trace options to isolate and correct a trap
          occuring on a small number of customer systems. This trap
          appeared to be occuring in the directory sort logic and
          may have been a result of a compiler inconsistancy.

12/28/94  The beeps sounded when the optimizer completes will no
          longer be performed when the unattended switch is used.

03/11/95  Added additional debug logic for Redetermine Media.

03/11/95  Corrected problem where Redetermine Media was not being
          called at end of optimization. This is a serious error.
          It can result in loss of data or corrupted volumes if
          reboot is not done prior to writing to the optimized
          volume.

FatSort
12/14/94  Increased stack size from 8192 to 49152 as a preventive
          measure.

Files
01/02/95  Correct "Help Not Available" error on initialization when
          the source directory name contains embedded blanks.

LD
12/28/94  If comments are to be placed on a separate line (/DW) then
          the comments will be indented 3 spaces for readability.

Optimize
01/02/95  Correct "Help Not Available" error on initialization when
          the source directory name contains embedded blanks.

01/09/95  Correct problem where selected drives were not being
          saved across executions, making "timed defrag" pretty
          much useless across system boots.

01/09/95  Added feature to allow the "timed defrag" option to be
          set for execution at a specific time of day as well as
          on an interval basis. The Optimize help files have been
          updated for this feature also.

01/24/95  Added feature to save the current execution priority
          setting so that the customer selected priority will be
          the default on future executions.

02/16/95  Correct problem where, when multiple drives are selected,
          all drives are analyzed but only the last drive is
          optimized. Besides correcting this problem, this fix
          prevents the interactive analyze feature from being
          selected if more than one drive is selected. i.e. the
          customer can press the Optimize button but not the
          Analyze button if more than one drive is selected. If
          only one drive is selected, Analyze and Optimize are
          enabled.

SEdit
01/02/95  Correct problem where autoformat incorrectly identifies
          a Master Boot Record as a Logical Boot Record when no
          primary partition is defined on the physical disk.

Sentry
01/02/95  Correct "Help Not Available" error on initialization when
          the source directory name contains embedded blanks.

Sysinfo
01/02/95  Correct "Help Not Available" error on initialization when
          the source directory name contains embedded blanks.

Undelete
01/02/95  Correct "Help Not Available" error on initialization when
          the source directory name contains embedded blanks.

