                               3Com Corporation
                     NDIS 2.01 Drivers Installation Notes


 DEC PATHWORKS
 -------------

 To install DEC PATHWORKS version 4.1 on a DOS NDIS workstation, DOS must be 
 installed on the target workstation C: drive, or you must have a bootable
 DOS floppy.  Follow these steps:

 1. Insert the PATHWORKS DOS Client Setup diskette version 4.1 in your 
    floppy drive.

 2. Change to that drive and execute the NETSETUP.EXE program.

 3. Follow the screens to select a Transport Protocol.

 4. Insert the appropriate diskettes for the selection you made in step 3.

 5. Select your network adapter by typing ETHERNET.
 
 6. Select the option (OTHER NDIS) adapters.

 7. When prompted for the DRIVE:\PATH\FILENAME for the NDIS driver, type:

    A:\NDIS\DOS\ELPC3.DOS

 8. When prompted for the full DRIVE:\PATH of the PROTOCOL.INI fragment,
    type:

    A:\NDIS\DOS

 9. Follow the rest of the installation screens and the procedure for writing
    the KEY DISK.

 The NETSETUP program will build the PROTOCOL.INI file for you and modify your
 startup files to use the adapter you have selected.

 NOTE:  You must add the /N parameter to the line in the STARTNET.BAT file 
        that starts the network scheduler.  For example:

        %BOOT%\DECNET\sch /h /n

                       (%VER NDIS - DEC PATHWORKS v1.0a)


