8.592 bytes

Product Information

Document ID: VLAR-3TMT5M

6.4GB 7200rpm EIDE Hard Drive - Product Overview

Applicable to: World-Wide

• Product Publications page.
• Product Jumper Settings page.

This drive features:

• S.M.A.R.T. EIDE technology
• Multi-segmented buffer (64KB reserved for drive firmware)

Warranty: 3 year limited Customer Carry-In Exchange

This product replaces:
None

This product was replaced by:
N/A

Packaging:
One box containing...

• Hard Drive
• Screws
• User's Guide
• Specification Sheet

Marketing and FRU Part Numbers
World Wide...
Marketing part number -> 01K1329
FRU part number -> 10L6078

Additional Part Numbers
Part number(s) for ordering multiple quantities:
None

Associated FRU Part Number(s):
None

Product Dates
World Wide...
Announce Date-> 4/15/1998
Planned Availability Date-> 4/30/1998
Withdrawal Date-> Not Applicable
Effective Withdrawal Date-> Not Applicable

Technical Specifications
Performance Specifications as known at time of announcement:
Actual performance varies based upon many factors and is frequently less than the maximum possible. 128 KB of buffer space is reserved for the drive firmware.
Average read: 9.5 ms

Buffer size: 512 KB

Data Rates:

• Max: 33MB/s (Ultra DMA Mode 2)
• Sustained: 11.5MB/sec
  

Rotational speed: 7200 rpm

Storage capacity: 6.4GB

Physical, Environmental, and Compatibility Specifications as known at time of announcement:
Weight: * lbs (0.61 kg)
Height: * inches (25.40 mm)
Width: * inches (101.60 mm)
Depth: * inches (146.00 mm)

Operating Temperature:

• low of 5 degrees Celcius to a high of 55 degrees Celcius

Relative Operating Humidity: low of 8% to a high of 90%

Agency Approvals:

• C-tick (Australia)
• CSA
• IEC
• TUV
• UL

ENERGY STAR-Compliant: *. The ENERGY STAR emblem does not represent EPA endorsement of any product or service.

Hardware Requirements for IBM systems:

• IntelliStation M Pro, IntelliStation Z Pro
• PC 300PL Pentium II models

All systems require Kit 70G8165 to install this drive in a 5.25" bay. Some systems may not have the required IDE and power cables for proper installation. The customer should inspect the system before installation to ensure all hardware required is obtained.

Hardware Requirements for Non-IBM systems:
The 6.4GB 7200rpm EIDE Hard Disk Drive is compatible with systems that conform to the American National Standards Institute ATA-3 standard X3T10/948D Revision 2e. Other systems may not provide adequate cooling.

Supported Operating Systems:

• Microsoft Windows 95
• Microsoft Windows 95 OSR 2.X
• Microsoft Windows NT 4.0

Limitations: Actual performance varies based upon many factors and is often less than the maximum possible.

Supported Software: Not Applicable

Other: None

Document Note(s):

1. The symbol * is used to denote that the information is currently unavailable for this product.
2. All dates are represented in the US English format of mm/dd/yyyy (where mm=month, dd=day, yyyy=year).
3. FRU stands for Field Replacement Unit. It is the part number used for ordering service/replacement parts.
4. Effective Withdrawal means that on the given date IBM will have withdrawn the products from marketing. After that date, the product can not be obtained directly from IBM.

	Search Keywords
	Document Category	Overview
	Date Created	17-04-98
	Last Updated	05-04-99
	Revision Date	05-04-2000
	Brand	IBM Options
	Product Family	Hard Drives
	Machine Type	6.x GB
	Model	01K1329
	TypeModel
	Retain Tip (if applicable)
	Reverse Doclinks and Admin Purposes