MCA Turboways 155 ATM software (4.1.x, 4.2.x, and 4.3.x):
MCA Turboways 155 ATM UTP/STP software (4.1.5, and 4.2.x):
MCA Turboways 100 ATM software:
PCI Turboways 25 STM UTP/STP software (4.2.1 and 4.3.x):
PCI Turboways 155 ATM software (4.1.5, 4.2.1, and 4.3.x):
PCI Turboways 155 ATM UTP/STP software (4.1.5, 4.2.1, and 4.3.x):
NOTES:
ATM is not supported at AIX Versions 4.1.1 through 4.1.3.
At AIX levels AIX 4.1.x, common ATM device driver software is contained in the devices.mca.8f7f.com fileset. This fileset needs to be at the latest level regardless of the ATM adapter (MCA or PCI) you have installed.
At AIX 4.2.x and later, common ATM device driver software is contained in the fileset devices.common.IBM.atm.rte.
It is extremely important in a back-to-back ATM 155 Mbs network that one node provide sonet clocking. This is not an issue in an ATM 100 Mbs network. To provide sonet clocking:
If you get a device busy message, make sure all ATM IP interfaces are detached or removed and ATM LAN emulation clients are defined or removed.
The first step is to configure the IP interface for the PVC.
* INTERNET ADDRESS (dotted decimal) (1.1.1.1) Network MASK (hexadecimal or dotted decimal) (255.255.255.0) Network Interface (at0) Connection Type pvc ATM Server Address () Alternate Device (atm0) Idle Timer () Best Effort Bit Rate (UBR) in Kbits/sec () * ACTIVATE the Interface after Creating it? yesAfter configuring the IP address, the permanent virtual channel connection is made through SMIT using the SMIT fastpath:
smit mkatmpvcOr, follow this series of screens:
smit smit devices /user applications / TCP/IP / network interfaces / network interface selection / pvcs.
PVC Description (Optional) () * VPI:VCI (0:1000) Network Interface (at0) Destination IP Address () Automatically Discover Destination IP Address yes LLC Encapsulation yes