|
7.773 bytes |
Service Hints & Tips |
Document ID: PMYS-3KXUCL |
Aptiva - 2140/2142 Removals and replacements - Index
Applicable to: China, Hong Kong, Japan, Australia, Canada, United States, Denmark, Finland, France, Germany, Italy, Netherlands, Norway, Spain, Sweden, United Kingdom
Before removing any FRU, power-off the computer, unplug all power cords from electrical outlets, then disconnect any interconnecting cables.
Attention: The system board, processors, adapter cards, DIMMs, and upgrade processors can be damaged by electrostatic discharge. Use an electrostatic discharge (ESD) strap to establish personal grounding. If you don t have an ESD strap, establish personal grounding by touching a ground point with one hand before touching the static-sensitive FRUs.
Note: Machine Type 2140, 2142 might contain drives and devices not illustrated in this documents. Follow replacement instructions for the same size device if in doubt.
The arrows in the removals and replacements procedures show the direction of movement to remove a field-replaceable unit (FRU), to turn a screw, or to press a tab to release the FRU.
Begin all removals by removing the cover (and rear cover, if applicable).
When other FRUs must be removed prior to removing the failing FRU, they are listed at the top of the page. Go to the removal procedure for each FRU listed, remove the FRU, and then continue with the removal of the failing FRU.
To replace a FRU, reverse the removal procedure and follow any notes that pertain to replacement.
Before disconnecting any cables, note their locations. Reinstall any new FRUs with cables in the same locations.
The following documents are excerpts from the Hardware Maintenance Manual. They may contain references to tables, figures or pages from this original document.
|
2140 |
2142 | |
|
Handling ESD Sensitive Parts |
|
|
|
Service Panel |
|
|
|
Cover |
|
|
|
3.5 - In. , 5.25 - In. Cage |
|
|
|
Media Console |
| |
|
Power Supply |
|
|
|
Memory (DIMM) |
|
|
|
Video memory |
|
|
|
Lithium Battery |
|
|
|
System Board |
|
|
|
Search Keywords |
| |
|
Hint Category |
Hardware Installation/Configuration | |
|
Date Created |
15-08-97 | |
|
Last Updated |
08-01-99 | |
|
Revision Date |
08-01-2000 | |
|
Brand |
IBM Aptiva | |
|
Product Family |
Aptiva | |
|
Machine Type |
2140, 2142 | |
|
Model |
All | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |
