13.126 bytes

Service Hints & Tips

Document ID: MNOK-42RPSL

Aptiva - 2134 Removals and replacements - System board

Applicable to: World-Wide

1090ůSystem Board

• Adapter cards (1035) - .
• Left drive support bracket (1010) - .
• Riser card (1045) - .
• Disconnect any cables necessary for removal.
• Memory (SIMMs) (1050) - .
• Cache memory modules (1055) if applicable - .
• Processor (1060).

Notes:
1. Be certain to reinstall the processor, SIMMs, and cache memory on the new system board if applicable.
2. When reinstalling a new system board, push the board to the rear and place it over the front locating pin prior to installing the screws.
3. Run the Setup Utility after changing the system board.

Figure 4-18. System Board

	Search Keywords
	Hint Category	Hardware Installation/Configuration, System Boards
	Date Created	01-12-98
	Last Updated	15-03-99
	Revision Date	15-03-2000
	Brand	IBM Aptiva
	Product Family	Aptiva
	Machine Type	2134
	Model	All
	TypeModel
	Retain Tip (if applicable)
	Reverse Doclinks and Admin Purposes