| | PS/1 - Can I add a serial port to the PS/1? | 05-04-99 | DETR-3UEKHS |
| | Aptiva-PS/1 - Installing Windows 3.1 printer driver downloaded from a Bulletin Board | 23-03-99 | EMON-3JTM7L |
| | Aptiva - Installing a printer driver for Works for Windows | 23-03-99 | DJON-3GEJMB |
| | Aptiva - Installing a downloaded Windows 3.1 printer driver | 22-03-99 | DJON-3GDRAY |
| | PS/1 - Installing a printer driver in Windows 3.0 | 22-03-99 | EMON-3JTQ29 |
| | Aptiva - Reconfiguring a printer when installing Windows 95 | 22-03-99 | YAST-3FTQGD |
| | Aptiva - When an "Insufficient Memory" message appears after installing an option | 12-03-99 | MCGN-3G2SRP |
| | PS/1 - 2168 G57/G87/P89/S55/S85/W52/W82 System Information | 19-02-99 | MWER-3UETL8 |
| | Aptiva - Configuring America Online to work with internal GVC 14.4Kbps modem | 17-02-99 | MCGN-3FHLXN |
| | PS/1 - Modem COM port setting on a 2133 or 2155 modem | 10-02-99 | EMON-3JSQJD |
| | Aptiva - Creative Labs Sound Blaster drivers | 10-02-99 | YAST-3FTNWL |
| | PS/1 - Hardware compatibility for all models | 10-02-99 | GSMH-3ACH4V |
| | PS/1 - Can I use my sound card to control my CD-ROM drive? | 10-02-99 | DSET-3FCH7F |
| | PS/1 - JAZZ16 soundcard 1362 configuration error | 10-02-99 | GSMH-386BJG |
| | PS/1-Aptiva - Can I setup my printer if it is not listed in the Windows 3.1 Control Panel? | 25-01-99 | DSET-3FG8R7 |
| | Aptiva - How to install a printer driver in Windows 3.1 | 25-01-99 | YAST-3FPU3Q |
| | Aptiva - JP-1000 Printers | 25-01-99 | YAST-3G8MX4 |
| | PS/1 - How do I install a printer driver in Windows 3.0? | 25-01-99 | DETR-3UEPLM |
| | Aptiva-PS/1 - Can I setup my printer if it is not listed in the Windows 3.1 Control Panel? | 25-01-99 | DETR-3UEKHQ |
| | Aptiva-PS/1 - How can I add a CD-ROM drive to my PS/1? | 11-01-99 | DETR-3UEN5M |
| | PS/1 - 486SX/DX/DX2 Processor Jumper Settings For J23/24/25 | 17-12-98 | DETR-3THMXU |
| | PS/1 - System Board Layout 486DX 33MHz | 17-12-98 | GKEY-3KEBVD |
| | PS/1 - System Board Layout 386SX 25MHz, 4MB RAM, 512K VM | 17-12-98 | GKEY-3KEBU5 |
| | PS/1 - System Board Layout 486SX 25MHz Level 2 | 17-12-98 | GKEY-3KEBV2 |
| | PS/1 - System Board Layout 386SX 25MHz, 2MB RAM, 512K VM | 17-12-98 | GSMH-3ACJ7M |
| | PS/1 - System Board Layout 486SX 33MHz | 17-12-98 | GSMH-3C4CLS |
| | PS/1 - Adding Math Co-Processor in Models 2133 & 2155 | 17-12-98 | GKEY-3KEBRP |
| | PS/1 - System Board Layout 386SX 25MHz, 2MB RAM, 256K VM | 17-12-98 | GSMH-38QJ2Z |
| | PS/1 - System Board Layout 486SX 20MHz/25MHz Level 1 | 17-12-98 | GKEY-3KEBUK |
| | PS/1 - System Board Layout 486DX 25/33MHz, 486DX2 50/66MHz | 17-12-98 | GSMH-3C4CM2 |
| | PS/1 - Upgrading Processor in Model 2168 | 17-12-98 | GSMH-3C4CLJ |
| | PS/1 - Information on Adding a Fixed Disk To a PS/1 286 | 14-12-98 | DETR-3UFMZ7 |
| | Aptiva - Adding Random Access Memory (RAM) to your Aptiva | 10-12-98 | DJON-3G9Q5Y |
| | Aptiva-PS/1 - How to connect display cables properly | 10-12-98 | MNOK-3QHN74 |
| | Aptiva - How can I tell if my additional memory is recognized? | 03-12-98 | DJON-3FZKHV |
| | Aptiva-PS/1 - Voltage Regulator Card and Shorting block | 28-10-98 | DETR-3TMKCM |
| HelpCenter Support | | | |
| | Aptiva - Virgin Islands support information | 11-03-99 | DJON-3FXN7Z |
| Input Devices | | | |
| | PS/1-Aptiva - PS/1 and Aptiva computers use a PS/2-Type mouse | 09-03-99 | YAST-3G7QB4 |
| | Aptiva - How to perform a two mouse button reset | 12-02-99 | DSET-3FZBZ5 |
| | PS/1 - Automatic Setting of NUMLOCK When Exiting a Program | 25-01-99 | EMON-3JSMYA |
| | PS/1 - How To Get The Mouse to Work with DOS 5.0 | 22-01-99 | DSET-3FH9EV |
| | Aptiva - Keyboard Error Codes: XX-301 | 04-06-98 | YAST-3G7TDR |
| Jumper/Switch Settings | | | |
| | PS/1 - 2155A 81A/76C/86C/72E/82E/ 24M/74T/84T/88V System Information | 19-02-99 | MWER-3SULGY |
| | PS/1 - 486SX/DX/DX2 Processor Jumper Settings For J23/24/25 | 17-12-98 | DETR-3THMXU |
| | PS/1 - System Board Layout 386SX 25MHz, 2MB RAM, 512K VM | 17-12-98 | GSMH-3ACJ7M |
| | PS/1 - System Board Layout 486SX 33MHz | 17-12-98 | GSMH-3C4CLS |
| | PS/1 - System Board Layout 486DX 25/33MHz, 486DX2 50/66MHz | 17-12-98 | GSMH-3C4CM2 |
| Lock-up/Hang | | | |
| | Aptiva - WordPerfect v. 6.0a or 6.1 lockups | 11-03-99 | MCGN-3G2SKA |
| | Aptiva - Tips on lockups with DOS or Windows games | 09-03-99 | YAST-3G8U7S |
| | Aptiva - Lockup problems with the game Myst | 17-12-98 | YAST-3G8UBQ |
| Memory | | | |
| | PS/1 - How can I free-up more memory for my games and applications? | 02-04-99 | DETR-3UEPLG |
| | PS/1 - How much video RAM does my PS/1 have, and is it upgradeable? | 02-04-99 | DETR-3UEQHS |
| | Aptiva-PS/1 - What is extended memory? | 02-04-99 | DETR-3UFPES |
| | Aptiva-PS/1 - What is expanded memory? | 02-04-99 | DETR-3UFPER |
| | PS/1 - Creating permanent swap files in Microsoft Windows 3.0 | 23-03-99 | EMON-3JTQG3 |
| | Aptiva - Does Microsoft Works support expanded memory? | 23-03-99 | YAST-3FSRVE |
| | Aptiva - Freeing up memory within Windows 3.0 or 3.1 | 23-03-99 | DJON-3GDMZJ |
| | Aptiva - Making a permanent swap file in Microsoft Windows 3.1 | 23-03-99 | DJON-3GEJXK |
| | Aptiva-PS/1 - Why do I still get "Insufficient Memory" messages after adding memory? | 23-03-99 | DJON-3G6K2H |
| | Aptiva - Parity check error | 15-03-99 | MCGN-3G6MKF |
| | Aptiva - Insufficient Memory messages | 15-03-99 | MCGN-3G6GZA |
| | Aptiva-PS/1 - Information about the DOS 640KB memory addressing limitation! | 15-03-99 | DETR-3UFMZ5 |
| | Aptiva - Why do I get an Insufficient Memory error when installing software? | 15-03-99 | DJON-3G2RQ2 |
| | Aptiva - Performance upgrading | 15-03-99 | DJON-3G8PW8 |
| | Aptiva - How to free up different types of memory | 15-03-99 | YAST-3FTR77 |
| | Aptiva - When an "Insufficient Memory" message appears after installing an option | 12-03-99 | MCGN-3G2SRP |
| | PS/1-Aptiva - Moving the Windows 3.1 swapfile to a different partition | 02-03-99 | DETR-45LRDN |
| | PS/1 - 2168 G57/G87/P89/S55/S85/W52/W82 System Information | 19-02-99 | MWER-3UETL8 |
| | PS/1 - Creating bootable DOS 4.01 diskettes | 18-02-99 | EMON-3JTQ7V |
| | PS/1 - Can MSCDEX version 2.22 be loaded into the upper memory area? | 12-02-99 | DSET-3FCFJ2 |
| | Aptiva - Creative Labs Sound Blaster drivers | 10-02-99 | YAST-3FTNWL |
| | Aptiva-PS/1 - Swapfiles in Microsoft Windows 3.X | 25-01-99 | YAST-3G6J3Q |
| | Aptiva-PS/1 - EMM386 Errors | 25-01-99 | DETR-3UEN5T |
| | Add memory to PS/1 486DX2 G82, S80, W77, and P84! | 14-01-99 | DETR-3UFPF8 |
| | PS/1 - Add memory to PS/1 486DX G72, S70, W67, and P74 | 14-01-99 | DETR-3UFPF7 |
| | PS/1 - Add memory to PS/1 2168 G57, S55, W52, G87, S85, W82, & P89 | 14-01-99 | DETR-3UFPF9 |
| | PS/1 - Add memory to PS/1 486SX G46, S45, W42, G49, S47, W45, G52, S50 & W48 | 14-01-99 | DETR-3UFPFB |
| | PS/1 - Add memory to PS/1 386SX 2123, 2133, & 2155 systems | 14-01-99 | DETR-3UFPF5 |
| | PS/1 - Video RAM Upgrades | 14-01-99 | GSMH-3ACDJ3 |
| | PS/1 - Add memory to PS/1 486SX/DX 2133 & 2155 *43,*44, G50,*53,*54,*76,*78 and S75 | 14-01-99 | DETR-3UFPFA |
| | PS/1 - SIMM Identification | 17-12-98 | GSMH-3ACEFL |
| | PS/1 - 486SX/DX/DX2 Processor Jumper Settings For J23/24/25 | 17-12-98 | DETR-3THMXU |
| | Aptiva - What are RAM, DRAM, SRAM, and VRAM? | 14-12-98 | DJON-3FWSZQ |
| | PS/1 - Impact on Data with Disconnection in PS/1 | 14-12-98 | EMON-3JVG64 |
| | Crossbrand - What are RAM, DRAM, SRAM, and VRAM? | 14-12-98 | DETR-3UFP7X |
| | Aptiva - Adding Random Access Memory (RAM) to your Aptiva | 10-12-98 | DJON-3G9Q5Y |
| | PS/1 - Performance Upgrading | 10-12-98 | DETR-3UFNU5 |
| | PS/1 - Memory Matrix for PS/1 Computers | 10-12-98 | DETR-3UFNUA |
| | Aptiva-PS/1 - What is the difference between memory storage and disk storage? | 03-12-98 | DETR-3UFPF6 |
| | Aptiva - How can I tell if my additional memory is recognized? | 03-12-98 | DJON-3FZKHV |
| | Crossbrand - Memory products glossary | 27-08-98 | PMYS-3NGPCL |
| | Aptiva - System doesn't count up all memory at power-on? | 12-06-98 | MCGN-3FJV9H |
| | Aptiva - Memory Matrix For PS/1 Computers | 28-05-98 | DJON-3G8JHR |
| | Aptiva-PS/1 - How can I tell if my additional memory is recognized? | 19-05-98 | DETR-3UEPLN |
| Modems | | | |
| | Aptiva - Using a TDD to communicate with another computer | 15-03-99 | DJON-3G7J2T |
| | Aptiva-PS/1 - Protection of MODEMs during thunderstorms | 09-03-99 | EMON-3JTMTG |
| | Aptiva - Configuring America Online to work with internal GVC 14.4Kbps modem | 17-02-99 | MCGN-3FHLXN |
| | Aptiva - Setting up a PS/1 modem for Works 3.0 | 17-02-99 | DJON-3G7MEP |
| | PS/1 - Modem COM port setting on a 2133 or 2155 modem | 10-02-99 | EMON-3JSQJD |
| | PS/1 - Changing Modem Baud Rate or Speed | 14-12-98 | EMON-3JSPRV |
| | PS/1 - What is a UART, and what type should I use? | 14-12-98 | DETR-3UFPFE |
| Non-IBM Hardware/Software | | | |
| | Aptiva - Avery Label numbers and their matching descriptions | 15-03-99 | YAST-3FKMMH |
| | Aptiva - Using a TDD to communicate with another computer | 15-03-99 | DJON-3G7J2T |
| | Aptiva - WordPerfect v. 6.0a or 6.1 lockups | 11-03-99 | MCGN-3G2SKA |
| | CrossBrand - Microsoft Internet Explorer 4.0 Important Notice | 22-02-99 | PMYS-3N3MGR |
| | Aptiva - Using Broderbund's KIDPIX Program On The PS/1 2011 or 2121 Computer | 17-12-98 | MCGN-3G8T3P |
| | Aptiva-PS/1 - Information about Microsoft Products on America Online | 08-12-98 | EMON-3JTLS5 |
| OS/2 | | | |
| | Crossbrand - OS/2 Warp Version 3 Versus MS Windows 95 | 29-04-99 | DETR-3UFNU7 |
| | Aptiva - How do I activate my OS/2 screen saver? | 23-03-99 | DJON-3G63A3 |
| | Aptiva - Information on replacing your OS/2 system's existing WINHELP.EXE file | 23-03-99 | MCGN-3G8NQ5 |
| | Aptiva - Removing OS/2 Warp version 3.0 from a system | 23-03-99 | DJON-3GEL3V |
| | Aptiva - How can I stop an inactive application in OS/2? | 23-03-99 | DJON-3G63RW |
| | Aptiva - How do I backup OS/2? | 23-03-99 | MCGN-3G5PKG |
| | Aptiva - 2144/2168 (SL-C) Install tips for OS/2 Warp | 23-03-99 | DSET-3G3ENW |
| | Aptiva - Parity check error | 15-03-99 | MCGN-3G6MKF |
| | PS/1-Aptiva - How to make Warp & Windows 95 & Boot Manager work | 15-03-99 | DSET-3FH9J2 |
| | CrossBrand - OperatingSystems - Effects of partitioning a drive | 15-03-99 | YAST-3FKSYF |
| | Crossbrand - The differences between OS/2, DOS and Windows | 15-03-99 | DETR-3UFP7R |
| | Aptiva-PS/1 - Are there any guidelines to naming files? | 09-03-99 | DSET-3FCJT4 |
| | Aptiva - Fix for Trap 00E errors in IBMWorks under OS/2 | 22-02-99 | YAST-3FTTWP |
| | Aptiva - Ways to run diagnostics | 16-02-99 | YAST-3G6TCD |
| | Aptiva - How can I safely delete WINHELP.BMK when Windows prompts me to do so? | 22-01-99 | MCGN-3G5RCX |
| | PS/1 - Creating Backup for PS/1 2155-x76 Preloaded With OS/2 | 14-12-98 | EMON-3JTPKM |
| | PS/1 - Creating Utility Disks for PS/1 x76 Models | 14-12-98 | EMON-3JTPQU |
| | Aptiva-PS/1 - Installing MS-DOS on a PC-DOS system | 10-12-98 | DETR-3UFMZC |
| | Aptiva/IBM IntelliStation/IBM PC - Understanding OS/2 Error Messages | 30-06-98 | DJON-3G8SKY |
| | Aptiva-PS/1 - Migration of OS/2 Programs | 08-06-98 | EMON-3JVFNQ |
| | Aptiva-PS/1 - Moving OS/2 Swapper Files | 01-06-98 | EMON-3JVFQ3 |
| | Aptiva - Restoring OS/2 CONFIG.SYS And The Desktop | 26-05-98 | IDTM-3G7L2A |
| Power | | | |
| | PS/1 - Can I take my PS/1 overseas? | 02-04-99 | DETR-3UEKHR |
| | PS/1 - Aptiva - Do I need a surge protector? | 09-03-99 | DJON-3FLMDM |
| | PS/1 - Impact on Data with Disconnection in PS/1 | 14-12-98 | EMON-3JVG64 |
| | Aptiva-PS/1 - Voltage Regulator Card and Shorting block | 28-10-98 | DETR-3TMKCM |
| | PS/1 - Voltage Selection Switch Shipped In wrong Position | 21-04-98 | GSMH-39PC2A |
| Power Management | | | |
| | Aptiva - SCSI devices not supported by Rapid Resume | 11-03-99 | GSMH-39EHTT |
| | Aptiva - Wake up on Ring and Scheduler Information | 17-12-98 | YAST-3G8T5C |
| Printers | | | |
| | Aptiva - Avery Label settings for Works for Windows | 25-03-99 | DJON-3FZLCA |
| | Aptiva - Using your 2390 PS/1 printer | 23-03-99 | YAST-3G8SQG |
| | Aptiva-PS/1 - Installing Windows 3.1 printer driver downloaded from a Bulletin Board | 23-03-99 | EMON-3JTM7L |
| | Aptiva - Microsoft Works chart or drawing in word processor does not print | 23-03-99 | DJON-3G8KYX |
| | Aptiva - Installing a printer driver for Works for Windows | 23-03-99 | DJON-3GEJMB |
| | Aptiva - Changing print size in Microsoft Works | 23-03-99 | DJON-3G8RRS |
| | PS/1 - Information on using printer control codes in Works | 23-03-99 | YAST-3G8JEH |
| | Aptiva - Using different Print Screen capabilities in Windows | 23-03-99 | DJON-3FYJNN |
| | PS/1 - Printing sideways (Landscape Mode) in Works for DOS | 23-03-99 | MCGN-3FJU8V |
| | Aptiva - Can I use my Tandy printers with Microsoft Windows? | 23-03-99 | DSET-3FCGWA |
| | PS/1 - Top and bottom labels do not print | 23-03-99 | DJON-3G7SRY |
| | Aptiva - Microsoft Works error message: "Footer Too Tall" on Panasonic printers | 23-03-99 | DJON-3G8P68 |
| | PS/1 - Microsoft Works label printing questions and answers | 23-03-99 | MCGN-3G2MHC |
| | Aptiva - No TrueType Fonts available using DeskJet series printers | 23-03-99 | DJON-3G8QZH |
| | Aptiva-PS/1 - Printing text files from the DOSShell file system | 23-03-99 | EMON-3JTM4S |
| | Aptiva - Why will IBM Proprinter only print in draft mode from Windows? | 23-03-99 | DSET-3FBB2R |
| | Aptiva - Do I have to set up my printer in all of my Windows applications? | 23-03-99 | DJON-3FLMMN |
| | Aptiva - Printing more than one form letter on a page in Works | 23-03-99 | MCGN-3FRM9G |
| | Aptiva - Changing the printer in Printer Setup in Works for Windows | 23-03-99 | DJON-3G8L73 |
| | PS/1-Aptiva - Page Setup Error printing envelopes on DeskJet 500 | 23-03-99 | DJON-3G7QDQ |
| | Aptiva - Envelope problems in Works 3.0 using Canon printers | 23-03-99 | DJON-3G5S9X |
| | Aptiva - Installing a downloaded Windows 3.1 printer driver | 22-03-99 | DJON-3GDRAY |
| | PS/1 - Installing a printer driver in Windows 3.0 | 22-03-99 | EMON-3JTQ29 |
| | Aptiva - Reconfiguring a printer when installing Windows 95 | 22-03-99 | YAST-3FTQGD |
| | Aptiva - Speeding up the printing time for a printer in Windows | 18-03-99 | IDTM-3G7LCT |
| | Aptiva - Colors print incorrectly on Works charts | 15-03-99 | DJON-3G8LD9 |
| | Aptiva - Connecting two printers to one computer | 15-03-99 | DJON-3FJKCU |
| | Aptiva - Connecting an Apple LaserWriter to an IBM Aptiva | 15-03-99 | IDTM-3G7K5T |
| | Aptiva - Using TrueType fonts with my dot matrix printer | 15-03-99 | DJON-3FYT3J |
| | Aptiva - Does Works for Windows support color text printing? | 15-03-99 | DSET-3G5DWD |
| | Aptiva - Is there a list of compatible printers for PS/1 and Aptiva systems? | 15-03-99 | MCGN-3G6RNL |
| | Aptiva - Printing envelopes on an HP LaserJet II/III | 11-03-99 | DETR-3V9JLD |
| | Aptiva - Is there an easy way to print from the DOS prompt? | 09-03-99 | DSET-3FHDVA |
| | Aptiva - Using True Type Fonts | 25-01-99 | DJON-3FZMC7 |
| | PS/1-Aptiva - Can I setup my printer if it is not listed in the Windows 3.1 Control Panel? | 25-01-99 | DSET-3FG8R7 |
| | Aptiva-PS/1 - Is there an easy way to print from the DOS prompt? | 25-01-99 | DETR-3UFNTZ |
| | Aptiva - How to install a printer driver in Windows 3.1 | 25-01-99 | YAST-3FPU3Q |
| | Aptiva - JP-1000 Printers | 25-01-99 | YAST-3G8MX4 |
| | PS/1 - Printing Text Files From DOS File System | 25-01-99 | EMON-3JTLWJ |
| | PS/1 - How do I install a printer driver in Windows 3.0? | 25-01-99 | DETR-3UEPLM |
| | Aptiva - Double-Spacing Occurs When Using Generic/Text Only Driver | 25-01-99 | DJON-3G5PFV |
| | Aptiva-PS/1 - Can I setup my printer if it is not listed in the Windows 3.1 Control Panel? | 25-01-99 | DETR-3UEKHQ |
| | PS/1 - Locating Printer Drivers on PS/1 | 14-12-98 | EMON-3JTHPU |
| | Aptiva-PS/1 - Is there a list of compatible printers for PS/1 and Aptiva systems? | 10-12-98 | DETR-3UFNU2 |
| | Aptiva - Formatting present in Preview but not on printout | 10-12-98 | MCGN-3G2NVB |
| | Crossbrand - Tips For Buying A Printer | 10-12-98 | DETR-3UFP7P |
| | Aptiva - Uneven Label Printing With Panasonic KX-P1124 | 10-12-98 | MCGN-3G8TPZ |
| | Aptiva - Printing Page Numbers in Form Letters | 10-12-98 | DJON-3G8TVH |
| | Aptiva - Selecting specific records from a Works database to print | 10-12-98 | DJON-3FYRYZ |
| | Aptiva - Can I use multiple databases when printing form letters or labels? | 09-12-98 | DJON-3F6GAK |
| Processors | | | |
| | Aptiva - Processor upgrades and HWCHECK | 15-03-99 | YAST-3G6JCG |
| | Aptiva - Performance upgrading | 15-03-99 | DJON-3G8PW8 |
| | PS/1 - 2155A 81A/76C/86C/72E/82E/ 24M/74T/84T/88V System Information | 19-02-99 | MWER-3SULGY |