| | Aptiva - How to set jumpers for two devices on a single IDE controller | 11-01-99 | MNOK-3T4NRU |
| | Aptiva - 2136 Removals and replacements - Bay 5 (3.5-In. Internal Bay) | 08-01-99 | MNOK-3ZXRH3 |
| | Aptiva - 2136 Removals and replacements - Bay 4 (3.5-In. FDD Bay) | 08-01-99 | MNOK-3ZXRBH |
| | Aptiva - 2136 Removals and replacements - Indicator LED and Cable | 08-01-99 | MNOK-3ZXSEN |
| | Aptiva - 2136 Removals and replacements - Bay 6 (3.5-In. Internal Bay) | 08-01-99 | MNOK-3ZXRL4 |
| | Aptiva - What is the 1 MB non-DOS partition on my hard drive? | 04-01-99 | GJAN-3T7Q8W |
| | Aptiva - Are hard drives recognized in the Setup Utility? | 04-01-99 | MNOK-3T5NM8 |
| | Aptiva - 2144 (Service Level H/I) Indicator LED and cable | 17-12-98 | MNOK-42QSFB |
| | Aptiva - 2137 Hard disk drive jumper settings 3.5" | 15-12-98 | JWOE-3LCP6J |
| | PS/1 - Creating Backup of Fixed Disk for PS/1 Model 2123, 2133 or 2155 | 14-12-98 | EMON-3JTPH3 |
| | Aptiva - 2137 Indicator LED and cable | 14-12-98 | PMYS-3LLQBU |
| | PS/1 - Adding a Second Hard Drive | 14-12-98 | DETR-3UFPFC |
| | Aptiva - 2140/2142 Hard disk drive jumper settings | 14-12-98 | JWOE-3KWRFX |
| | PS/1 - Creating Backup for PS/1 2155-x76 Preloaded With OS/2 | 14-12-98 | EMON-3JTPKM |
| | Aptiva - 2168 (Service Level H/I) Indicator and LED cable | 14-12-98 | MNOK-42RKAQ |
| | PS/1 - Impact on Data with Disconnection in PS/1 | 14-12-98 | EMON-3JVG64 |
| | Aptiva - 2136 Hard disk drive jumper settings 5.25" | 14-12-98 | JWOE-3LDN6Q |
| | PS/1 - Information on Adding a Fixed Disk To a PS/1 286 | 14-12-98 | DETR-3UFMZ7 |
| | PS/1 - Performance Upgrading | 10-12-98 | DETR-3UFNU5 |
| | Aptiva - How to ensure hard drive is in startup sequence | 09-12-98 | MNOK-3SWUTG |
| | Aptiva - How do I convert to FAT32? | 09-12-98 | MCGN-3FTNC5 |
| | Aptiva - How to create multiple partitions smaller than 2GB | 09-12-98 | MNOK-3SWTXZ |
| | Aptiva - Maximum hard drive size matrix | 09-12-98 | DETR-3ULLPZ |
| | Aptiva - 2153 Replacing the indicator LEDs | 09-12-98 | DETR-3WFKKY |
| | Aptiva - How to change hard drive power cables | 09-12-98 | MNOK-3T6R3E |
| | Aptiva-PS/1 - Optimizing Hard Drive Space Through Drive Partitioning | 08-12-98 | DETR-3UFNU6 |
| | Aptiva - How to determine if hard drive is seen in BIOS | 08-12-98 | BMOE-3Q8MDD |
| | Aptiva - E-series "Insert System Diskette and press enter key to reboot" message | 08-12-98 | JWOE-3M2GAM |
| | Aptiva - How to reseat IDE Data Cable on hard drive | 08-12-98 | BMOE-3Q8MJ6 |
| | Aptiva - 2136 Hard Drive & Jumper Settings | 08-12-98 | RMIE-3G6BPX |
| | Aptiva - "Not Enough Disk Space" error after adding 2.5GB or larger hard drive and trying to restore original preload | 08-12-98 | PMYS-3KEMZX |
| | Aptiva - How to determine if another device is connected to the hard drive controller | 08-12-98 | BMOE-3Q8MN6 |
| | Aptiva - How to determine if partition usage is at 100% on an Aptiva pre-loaded with Windows 95 | 08-12-98 | BMOE-3Q8PVC |
| | Aptiva - How To determine hard disk size in BIOS | 08-12-98 | BMOE-3Q8PTD |
| | Aptiva-PS/1 - DEFRAG statistics after running DEFRAG | 08-12-98 | DETR-3UEMWT |
| | Aptiva - How to remove and reinstall a hard drive | 08-12-98 | BMOE-3Q8PK3 |
| | Aptiva - 2134/2176/2159 Hard disk drive jumper settings | 08-12-98 | GCOR-38ZL7C |
| | Aptiva - Hard drive size limit on systems with Windows 95 | 08-12-98 | DSET-3EED6L |
| | Aptiva - Maintenance of Stacker Compressed Drives | 08-12-98 | MCGN-3FJN4J |
| | Aptiva - How to restore MBR and boot files in Windows 95 | 08-12-98 | BMOE-3Q8MV8 |
| | Aptiva - How to ensure correct configuration for hard drive jumpers | 08-12-98 | BMOE-3Q8MFE |
| | Aptiva - How to determine if there are partitions greater than 2GB on hard drive | 08-12-98 | BMOE-3Q8Q84 |
| | Aptiva - RETAIN H057399 Audio Interference (EMEA) | 07-12-98 | JWOE-3PTGSN |
| | Aptiva - PC Doctor fails on unpartitioned hard drives | 04-12-98 | DETR-3SEU27 |
| | Aptiva-PS/1 - What is the difference between memory storage and disk storage? | 03-12-98 | DETR-3UFPF6 |
| | CrossBrand - Hardfile speed/noise problems | 25-11-98 | GSMH-399CPX |
| | Aptiva - RETAIN TIP - Production Change - Hard drive | 03-11-98 | DETR-3ZRPTR |
| Hardware Installation/Configuration | | | |
| | Aptiva - Setting keyboard to use Belgian French in Windows 95/98 DOS mode | 25-05-99 | MIGR-47UNJD |
| | Aptiva - Setting keyboard to use Danish in Windows 95/98 DOS mode | 14-05-99 | MIGR-47UM3G |
| | Aptiva - Setting keyboard to use Swedish in Windows 95/98 DOS mode | 14-05-99 | MIGR-47UMN8 |
| | PS/1 - Can I add a serial port to the PS/1? | 05-04-99 | DETR-3UEKHS |
| | Aptiva - 2144/2168 How to restore Mwave drivers on systems with OS/2 | 24-03-99 | MNOK-3PZNAN |
| | Aptiva - 2144/2168 How to restore Mwave drivers on systems with Windows 95 | 24-03-99 | MNOK-3PZNH2 |
| | Aptiva - 2144/2168 (SL-F/H/I) Type 1 Processor speed settings | 23-03-99 | DETR-3TARNP |
| | Aptiva - 2144/2168 (SL-C) Factory-installed modem jumper and switch settings | 23-03-99 | DETR-3TARUL |
| | Aptiva - 2144/2168 (SL-F/H/I) Type 1 System board layout and locations | 23-03-99 | DETR-3TARKT |
| | Aptiva - 2144/2168 (SL-F/H/I) Type 1 SIMM configuration | 23-03-99 | PMYS-3PKRN6 |
| | Aptiva-PS/1 - Installing Windows 3.1 printer driver downloaded from a Bulletin Board | 23-03-99 | EMON-3JTM7L |
| | Aptiva - 2144-W30/W31 Disabling the Mwave modem | 23-03-99 | DETR-455J94 |
| | Aptiva - 2144/2168 (SL-H/I) Type 2 System board bus speed settings | 23-03-99 | DETR-3TARSC |
| | Aptiva - 2144-S15 System board layout, locations, and switches | 23-03-99 | DETR-3TZMNW |
| | Aptiva - Installing a printer driver for Works for Windows | 23-03-99 | DJON-3GEJMB |
| | Aptiva - 2144/2168 (SL-H) Difficulty using Internet Phone | 23-03-99 | RMIE-3F9CXG |
| | Aptiva - 2144/2168 (SL-I) Hard disk drive jumper settings | 23-03-99 | DETR-3TARVV |
| | Aptiva - 2144/2168 (SL-H/I) Hardware interfaces | 23-03-99 | DETR-3TAQ5F |
| | Aptiva - 2144/2168 (SL-H/I) Type 2 Processor speed settings | 23-03-99 | DETR-3TARR2 |
| | Aptiva - 2144/2168-Axx Telegame procedure | 23-03-99 | PMYS-3HZHV3 |
| | Aptiva - 2144/2168 (SL-H/I) Type 2 System board layout and locations | 23-03-99 | DETR-3TARPP |
| | Aptiva - 2144/2168 (SL-F/H/I) Type 1 Processor type settings | 23-03-99 | DETR-3TARM9 |
| | Aptiva - 2144/2168 (SL-H) Considerations: In DOS, customer may not get certain features in Mwave depending upon its configuration | 23-03-99 | PMYS-3PNK3P |
| | Aptiva - 2144/2168 (SL-H/I) - How to install video memory upgrade | 23-03-99 | MNOK-3QHNJP |
| | Aptiva - 2144/2168 (SL-C) C-1 System board layout and locations | 23-03-99 | SSCT-3ELJL5 |
| | Aptiva - 2144/2168 (SL-H/I) Type 2 SIMM configuration | 23-03-99 | PMYS-3PKRMU |
| | Aptiva - 2140-LQ4/LQ5 Reinstalling the Gaming Munitions Manager | 22-03-99 | DETR-468HCX |
| | Aptiva - 2144/2168 HP Deskjet 855C Install program lockup | 22-03-99 | MCGN-3G8KV3 |
| | Aptiva - Installing a downloaded Windows 3.1 printer driver | 22-03-99 | DJON-3GDRAY |
| | Aptiva - 2134/2176 - How to remove and reinstall Mwave drivers | 22-03-99 | PMYS-3HZL4B |
| | Aptiva - 2144/2168 Deleting Mwave | 22-03-99 | DSET-3FBQX2 |
| | PS/1 - Installing a printer driver in Windows 3.0 | 22-03-99 | EMON-3JTQ29 |
| | Aptiva - Reconfiguring a printer when installing Windows 95 | 22-03-99 | YAST-3FTQGD |
| | Aptiva - 2176 Removals and replacements - System board | 18-03-99 | MNOK-42RS2U |
| | Aptiva - 2176 Removals and replacements - Processor for Type 1 system board | 18-03-99 | MNOK-42RRRS |
| | Aptiva - 2168/2176 Removals and replacements - Power supply | 18-03-99 | MNOK-42RK7L |
| | Aptiva - 2176 Using Copy Con Com1 | 18-03-99 | DETR-455J5H |
| | Aptiva - 2134/2176 System board layout & locations (Type A-1) | 18-03-99 | GCOR-38ZKYH |
| | Aptiva - 2176-C6V/9R2 How to reseat the video capture card and VESA feature connector | 18-03-99 | MNOK-3Q5TSG |
| | Aptiva - 2176 Removals and replacements - Cache memory for Type 2 system board | 18-03-99 | MNOK-42RRAT |
| | Aptiva - 2176 Removals and replacements - Memory (SIMM) | 18-03-99 | MNOK-42RQTQ |
| | Aptiva - 2176 Removals and replacements - Indicator LED and cable | 18-03-99 | MNOK-42RRXW |
| | Aptiva - 2168/2176 Removals and replacements - Hard disk drives | 18-03-99 | MNOK-42RK63 |
| | Aptiva - 2176 Removals and replacements - Cache memory for Type 1 system board | 18-03-99 | MNOK-42RR6W |
| | Aptiva - 2176 Removals and replacements - Processor for Type 2 system board | 18-03-99 | MNOK-42RRUT |
| | Aptiva - 2176 Removals and replacements - Riser card | 18-03-99 | MNOK-42RQ6Y |
| | Aptiva - 2134/2176 SIMM configurations (Type A-2) | 15-03-99 | GCOR-38ZK8L |
| | Aptiva - 2159 Removals and replacements - Index | 15-03-99 | DETR-42QM5X |
| | Aptiva - 2159 Removals and replacements - Memory (SIMM) | 15-03-99 | DETR-42QLJA |
| | Aptiva - What initialization strings should the Mwave work with? | 15-03-99 | RMIE-3FYAKC |
| | Aptiva - 2134/2144 Removals and replacements - Riser card | 15-03-99 | MNOK-42QQZX |
| | Aptiva - 2159 Removals and replacements - Cache memory | 15-03-99 | DETR-42QLNR |
| | Aptiva - 2159 Removals and replacements - Processor | 15-03-99 | DETR-42QLVN |
| | Aptiva - 2134 Removals and replacements - Index | 15-03-99 | MNOK-42RLC4 |
| | Aptiva - 2134/2144 Removals and replacements - Power supply | 15-03-99 | MNOK-42QQY2 |
| | Aptiva - 2159 Removals and replacements - Power supply | 15-03-99 | DETR-42QL94 |
| | Aptiva - 2134/2176 Removals and replacements - Lithium battery on Type 1 system board | 15-03-99 | MNOK-42RPK5 |
| | Aptiva - 2134/2176 Removals and replacements - Memory (DIMM) | 15-03-99 | MNOK-42RQXW |
| | Aptiva - 2159 Removals and replacements - Memory (DIMM) | 15-03-99 | DETR-42QLLN |
| | Aptiva - 2134/2176 Removals and replacements - Lithium battery on Type 2 system board | 15-03-99 | MNOK-42RPWQ |
| | Aptiva - Removing/installing Single In-line Memory Modules (SIMMs) | 15-03-99 | MNOK-3T5SFG |
| | Aptiva - 2159 Removals and replacements - Drive bays 4 and 5 | 15-03-99 | DETR-42QKZB |
| | Aptiva - 2134/2176/2159 System board layout & locations (Type A-2) | 15-03-99 | GCOR-38ZKXW |
| | Aptiva - 2159/2176 Removals and replacements - Processor (Type A-2) | 15-03-99 | GCOR-38ZKPJ |
| | Aptiva - Changing the settings on the Mwave card | 15-03-99 | DSET-3FACVF |
| | Aptiva - 2134/2176 SIMM configurations (Type A-1) | 15-03-99 | GCOR-38ZK7N |
| | Aptiva - How to manually set the Mwave Discriminator to determine whether the call is fax or voice | 15-03-99 | MCGN-3FZQBQ |
| | Aptiva - 2134/2144 Removals and replacements - Hard disk drives | 15-03-99 | MNOK-42QNB5 |
| | Aptiva - 2134 Removals and replacements - Processor for Type 1 system board | 15-03-99 | MNOK-42RNCS |
| | Aptiva - 2159 Removals and replacements - Riser card | 15-03-99 | DETR-42QLEB |
| | Aptiva - 2134 Removals and replacements - Indicator LED and cable | 15-03-99 | MNOK-42RPPH |
| | Aptiva - 2134/2144/2168/2176 Disabling V.42 compression on the Mwave modem | 15-03-99 | GJAN-3T7SG3 |
| | Aptiva - 2134 Removals and replacements - Cache memory | 15-03-99 | MNOK-42RN79 |
| | Aptiva - 2159 System board layout and locations | 15-03-99 | DETR-3UQRPA |
| | Aptiva - Disabling Mwave modem on Windows 95 systems | 15-03-99 | DSET-3DSLCE |
| | Aptiva - 2159 Removals and replacements - System board | 15-03-99 | DETR-42QM4J |
| | Aptiva - 2134 Removals and replacements - System board | 15-03-99 | MNOK-42RPSL |
| | Aptiva - 2134/2144 Removals and replacements - Memory (SIMM) | 15-03-99 | MNOK-42QR4T |
| | Aptiva - 2134 Removals and replacements - Processor for Type 2 system board | 15-03-99 | MNOK-42RPCK |
| | Aptiva - 2134/2176 Telegame procedure | 15-03-99 | PMYS-3HZHD6 |
| | Aptiva - 2159 Removals and replacements - Battery | 15-03-99 | DETR-42QM2P |
| | Aptiva - How do I configure Rapid Resume, Wake Up on Ring and Standby? | 15-03-99 | DSET-3FCEKH |
| | Aptiva - 2161 System board connector specifications | 12-03-99 | GSMH-3GKC67 |
| | Aptiva - 2161 Removals and replacements - Lithium battery | 12-03-99 | GSMH-3GGJ5X |
| | Aptiva - 2161 Core bus frequency ratio settings | 12-03-99 | GSMH-3GGKWA |
| | Aptiva - 2161 Power supply cable connector specifications | 12-03-99 | GSMH-3GGKZQ |
| | Aptiva - 2161 Setup Utility described | 12-03-99 | GSMH-3GECAF |
| | Aptiva - 2161 Removals and replacements - Hard disk drives | 12-03-99 | GSMH-3GGEEZ |
| | Aptiva - 2161 Removals and replacements - Riser card | 12-03-99 | GSMH-3GGETF |
| | Aptiva - 2161 Removals and replacements - Processor | 12-03-99 | GSMH-3GGJ3B |
| | Aptiva - 2161 Removals and replacements - Power supply | 12-03-99 | GSMH-3GGEQG |
| | Aptiva - 2161 Removals and replacements - Memory (DIMM) | 12-03-99 | GSMH-3GGEVE |
| | Aptiva - 2161 Removals and replacements - Cache memory | 12-03-99 | GSMH-3GGEZM |
| | Aptiva - 2161 System board layout & locations | 12-03-99 | GSMH-3GGK4W |
| | Aptiva - 2161 Hard disk drive jumper settings | 12-03-99 | GSMH-3GGLJP |
| | Aptiva - 2161 Removals and replacements - System board | 12-03-99 | GSMH-3GGJSF |
| | Aptiva - 2161 System bus clock and processor speed jumpers | 12-03-99 | GSMH-3GGKGE |
| | Aptiva - 2161 Removals and replacements - Indicator LED and cable | 12-03-99 | GSMH-3GGJMU |
| | Aptiva - When an "Insufficient Memory" message appears after installing an option | 12-03-99 | MCGN-3G2SRP |
| | Aptiva - 76H1561 Joystick configuration for Windows 95 and MechWarrior II | 11-03-99 | DSET-3D6HND |
| | Aptiva - 2162 Hard disk drive jumper settings | 11-03-99 | COBN-3G5EFR |
| | Aptiva - 2162 Removals and replacements - Hard disk drives | 11-03-99 | COBN-3G5CS3 |
| | Aptiva - 2162 Removals and replacements - Cache memory | 11-03-99 | COBN-3G5CW7 |
| | Aptiva - 2162 System board layout and locations | 11-03-99 | COBN-3G5D4E |
| | Aptiva - 2162 Removals and replacements - Index | 11-03-99 | DETR-44BL7L |
| | Aptiva - 2162 Core bus frequency ratio settings | 11-03-99 | GSMH-3GCE5E |
| | Aptiva - 2161/2162 NDC network kit installation instructions | 11-03-99 | DETR-3VRMJT |
| | Aptiva - 2162 Removals and replacements - Memory (DIMM) | 11-03-99 | COBN-3G5CVK |
| | Aptiva - 2162 System bus clock & processor speed | 11-03-99 | GSMH-3GCDAK |
| | Aptiva - 2162 Removals and replacements - Lithium battery | 11-03-99 | COBN-3G5CXN |
| | Aptiva - 2162 Removals and replacements - System board | 11-03-99 | COBN-3G5CYE |
| | Aptiva - 2162 Removals and replacements - Processor | 11-03-99 | COBN-3G5CWZ |
| | Aptiva - 2162 Removals and replacements - Power supply | 11-03-99 | COBN-3G5CU6 |
| | Aptiva - 2162 Removals and replacements - Riser card | 11-03-99 | COBN-3G5CUT |
| | Aptiva - 2136 System board layout & jumper settings | 10-03-99 | RMIE-3FZGED |
| | Aptiva - 2136 Removals and replacements - System board | 10-03-99 | MNOK-3ZXSHL |
| | Aptiva - 2136 System board connector functions | 10-03-99 | RMIE-3FZGRW |
| | Aptiva - 2136-E40 NDC network kit installation instructions | 10-03-99 | DETR-3VRMAH |
| | Aptiva - 2140/2142 - Second IDE device not being recognized | 10-03-99 | DETR-44DJUK |
| | Aptiva - 2136 Removals and replacements - RTC lithium battery | 10-03-99 | MNOK-3ZXSCB |
| | Aptiva - 2136 System board connector pin signals | 10-03-99 | RMIE-3G6BDT |
| | Aptiva - 2136 Power supply cable connector specifications | 10-03-99 | RMIE-3FZGY9 |
| | Aptiva - 2140, 2161, and 2162 Free system resources - Australia & New Zealand | 10-03-99 | DETR-45UJDL |
| | Aptiva - 2138-E76 Modem not detected after Aptivization | 09-03-99 | DETR-3TSR5Z |
| | Aptiva - 2138 Removals and replacements - System board | 09-03-99 | MNOK-3ZXNJK |
| | Aptiva - E96, E2N, E5D NDC network kit installation instructions | 09-03-99 | DETR-3WLHM8 |
| | Aptiva - 2138-E76 - Cannot set power on password | 09-03-99 | DETR-3TTK2J |
| | Aptiva - 2137-E85 NDC network kit installation instructions | 09-03-99 | DETR-3WLHDJ |
| | Aptiva - 2138 Removals and replacements - System backup battery | 09-03-99 | MNOK-3ZXNFC |
| | Aptiva - 2137 - Trouble installing a third party sound card | 09-03-99 | DETR-3S7H94 |
| | Aptiva - 2137-E26, E46, E56, E84 NDC network kit installation instructions | 09-03-99 | DETR-3VRKUQ |
| | Aptiva - 2137-E14, E24, E25, E34, E35 NDC network kit installation instructions | 09-03-99 | DETR-3VRMW3 |
| | Aptiva - 2138-E76 NDC network kit installation instructions | 09-03-99 | DETR-3VRN3N |
| | Aptiva - 2138 Removals and replacements - Power supply | 09-03-99 | MNOK-3ZXMXJ |
| | Aptiva - Iomega Zip drive does not install with Cyrix processor | 09-03-99 | DETR-3TRNKE |
| | Aptiva - 2138 Removals and replacements - Pentium II processor module | 09-03-99 | MNOK-3ZXN43 |
| | Aptiva - 2138-E86 NDC network kit installation instructions | 09-03-99 | DETR-3WLH5K |
| | Aptiva - 2144 Installing Aria 16 sound card in Windows 95 | 08-03-99 | GJAN-3TBJ3W |
| | Aptiva - Lucent Modem AT Commands | 05-03-99 | MCGN-3GVJGN |
| | Aptiva - 2156 Removals and replacements - Start | 03-03-99 | DETR-3ZNR6V |
| | Aptiva - 2156 Bezel power button spring replacement instructions | 03-03-99 | DETR-42YKDR |
| | Aptiva - 2139/2153 Hard drive jumper settings | 03-03-99 | DETR-3WDHVJ |
| | Aptiva - 2158/2163 Removals and replacements - Indicator LED and cable | 02-03-99 | DETR-42RPVD |
| | Aptiva - 2163 Removals and replacements - Processor heat sink and fan | 02-03-99 | DETR-42RPNP |
| | Aptiva - 2158/2163 Removals and replacements - Identifying parts of the system unit | 02-03-99 | DETR-42RKR7 |
| | Aptiva - 2158/2163 Removals and replacements - System board | 02-03-99 | DETR-42RPX8 |
| | Aptiva - 2158 Removals and replacements - Processor | 02-03-99 | DETR-42RPAC |
| | Aptiva - 2158/2163 Removals and replacements - Power supply | 02-03-99 | DETR-42RNNC |
| | Aptiva - 2163 Removals and replacements - Processor | 02-03-99 | DETR-42RPJC |
| | Aptiva - 2161 Power-on password, CMOS reset | 25-02-99 | GSMH-3GEBWE |
| | Aptiva - 2136 Power on password | 25-02-99 | RMIE-3FZC7F |
| | Aptiva - 2162 Media Console locations and connectors | 25-02-99 | COBN-3G5EJH |
| | Aptiva - 2134/2176/2159 Power-on password, CMOS reset | 25-02-99 | GCOR-38ZJWF |